Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CERTIFIED METAL FINISHING, INC.

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of CERTIFIED METAL FINISHING, INC. in 1420 S.W. 28TH AVE., POMPANO BEACH, FL 33069 (NAICS 332813). OSHA activity number 340030006.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Certified Metal Finishing, INC. — free Get an email when a new federal OSHA severe-injury report for Certified Metal Finishing, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1420 S.W. 28TH AVE.
City
POMPANO BEACH
State
FL
ZIP
33069
Mailing
1420 S.W. 28TH AVE., POMPANO BEACH, FL 33069
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332813
Employees
31
Ownership type
A

4 citations on file for this inspection.

1910.141 G04

Serious Gravity 5 1 instance 25 exposed
Issued
Mar 17, 2015
Abate by
Apr 10, 2015
Penalty
Initial $2,800 · Current $1,680 Reduced
29 CFR 1910.141(g)(4): Food or beverages were stored in area(s) exposed to toxic material(s):     On or about October 22, 2014, the employer at above addressed jobsite, did not ensure that employees have a safe area to store, handle and ingest their food or beverage away from their working area where there are toxic materials such as but not limited to, Miccro Super XP2000 containing VM&P naphtha,  toluene, lead chromate and talc, Alkume E containing 60-100% of sodium hydroxide, sulfuric acid containing 51% and nitric acid containing 65%.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

1910.1026 H01

Serious Gravity 5 4 instances 4 exposed
Issued
Mar 17, 2015
Abate by
Apr 10, 2015
Penalty
Initial $4,200 · Current $2,520 Reduced
29 CFR 1910.1026(h)(1): A hazard was present or was likely to be present from skin or eye contact with chromium (VI); however, the employer did not provide appropriate personal protective clothing and equipment at no cost to employees, and/or did not ensure that employees used such clothing and equipment:    On or about October 22, 2014, the employer at above addressed jobsite, did not ensure that employees working in the anodizing department have tightly fitting safety goggles, long sleeve shirt, acid resistant chemical suit and/or apron as required when working with corrosive and toxic substances such as but not limited to, Miccro Super XP2000 containing VM&P naphtha,  toluene, lead chromate and talc, Alkume E containing 60-100% of sodium hydroxide, sulfuric acid containing 51%, nitric acid containing 65%.
Recent events (2)
  • — I (S) $2520
  • — Z (S) $4200

1910.141 C01 I

Other-than-serious 1 instance 25 exposed
Issued
Mar 17, 2015
Abate by
Apr 10, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.141(c)(1)(i): Toilet facilities were not provided in accordance with TABLE J-1 of this Section.  On or about October 22nd 2014, the employer at above addressed jobsite, did not ensure that 25 employees working in the operative area have at least 2 toilets or water closets as specified in Table J-1 of the Standard.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H03 IV

Other-than-serious 1 instance 25 exposed
Issued
Mar 17, 2015
Abate by
Apr 10, 2015
Penalty
Initial $700 · Current $420 Reduced
29 CFR 1910.1200(h)(3)(iv):   The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:    On or about October 22, 2014, at the above addressed jobsite, the employer did not provide adequate training or information regarding the hazards of chemicals, according with the Globally Harmonized System of Classification and Labeling of Chemicals with pictograms or representations as a part of the new SDS and label format.
Recent events (2)
  • — I (O) $420
  • — Z (O) $700

View Certified Metal Finishing, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340030006.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.