Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,192,068Inspections Most recent open 2026-08-04 Last loaded 2026-08-07

OSHA Inspection: ROOFSMART, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ROOFSMART, INC. in 3061 S. BERNICE ROAD, LANSING, IL 60438 (NAICS 238160). OSHA activity number 340038793.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Roofsmart, INC. for free Get an email when a new federal OSHA severe-injury report for Roofsmart, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
ROOFSMART, INC.
Site address
3061 S. BERNICE ROAD
City
LANSING
State
IL
ZIP
60438
Mailing
2728 CHICAGO ROAD, SOUTH CHICAGO HEIGHTS, IL 60411
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
8
Ownership type
A

4 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 5 exposed
Issued
Apr 22, 2015
Abate by
Jun 9, 2015
Penalty
Initial $400 · Current $400
29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.  a. On or about April 21, 2015 - the employer did not certify to OSHA within 10 days after the abatement date that each of the following cited violations issued had been corrected:  Citation Number            Item Number            Abatement Date 01                               001                        02/20/2015 01                               002a                      02/20/2015 01                               002b                      02/20/2015
Recent events (1)
  • · Z (O) $400

1926.102 A01

Serious Gravity 1 1 instance 3 exposed
Issued
Feb 11, 2015
Abate by
Feb 20, 2015
Penalty
Initial $1,200 · Current $1,200
29 CFR 1926.102(a)(1): Employees shall be provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical or radiation agents:    a) On or about October 24, 2014 - at a jobsite located at 3061 S. Bernice Road,  Lansing, IL. - employees using a pneumatic nail gun did not wear safety glasses, thereby exposing the employees to hazards associated with eye injuries.
Recent events (1)
  • · Z (S) $1200

1926.501 B13

Serious Gravity 10 1 instance 5 exposed
Issued
Feb 11, 2015
Abate by
Feb 20, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502:     a) On or about October 24, 2014 - at a jobsite located at 3061 S. Bernice Road,  Lansing, IL. - employees performing roofing activities were working near unprotected sides and edges without the use of fall protection, thereby exposing the employees to fall hazards of approximately twenty eight (28) feet.
Recent events (1)
  • · Z (S) $2800

1926.503 B01

Serious Gravity 10 1 instance 5 exposed
Issued
Feb 11, 2015
Abate by
Feb 20, 2015
Penalty
Initial $0 · Current $0
29 CFR 1926.503(b)(1): The employer shall verify compliance with paragraph (a) of this section by preparing a written  certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training:     a) On or about October 24, 2014 - at a jobsite located at 3061 S. Bernice Road,  Lansing, IL. - employees performing roofing activities were not provided certified training for employees working near unprotected sides/edges or use of fall protection, thereby exposing the employees to fall hazards of approximately twenty eight (28) feet.
Recent events (1)
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340038793.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.