LEES SUMMIT, MO —
OSHA Inspection: DIODES FABTECH INC
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of DIODES FABTECH INC in 777 NW BLUE PARKWAY, LEES SUMMIT, MO 64086 (NAICS 334413). OSHA activity number 340042050.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Diodes Fabtech INC — free
Get an email when a new federal OSHA severe-injury report for Diodes Fabtech INC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- DIODES FABTECH INC
- Site address
- 777 NW BLUE PARKWAY
- City
- LEES SUMMIT
- State
- MO
- ZIP
- 64086
- Mailing
- 777 NW BLUE PARKWAY, LEES SUMMIT, MO 64086
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 334413
- Employees
- 225
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.119 D02 I C
- Issued
- Feb 3, 2015
- Abate by
- Mar 8, 2016
- Penalty
- Initial $7,000 · Current $3,500 Reduced
086214601860
General-duty citation text
29 CFR 1910.119(d)(2)(i)(C): Process safety information pertaining to the technology of the process did not include the maximum intended quantity: (a) At Diodes Fabtech Inc. on or about October 27, 2014 the process safety information did not include the maximum intended quantity for tri-chlorosilane. (b) At Diodes Fabtech Inc. on or about October 27, 2014 the process safety information did not include the maximum intended quantity for nitric acid. (c) At Diodes Fabtech Inc. on or about October 27, 2014 the process safety information did not include the maximum intended quantity for hydrogen fluoride. (d) At Diodes Fabtech Inc. on or about October 27, 2014 the process safety information did not include the maximum intended quantity for di-borane. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $3500
- — Z (S) $7000
1910.119 O01
- Issued
- Feb 3, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.119(o)(1): The employer did not certify that they have evaluated compliance with the provisions of this section: (a) At Diodes Fabtech, Inc. on or about October 27, 2014 the employer had not evaluated compliance with the provisions of 29 CFR 1910.119 and did not certify such. Diodes was a PSM covered site with an inventory of TCS greater than the threshold quantity of 5,000 pounds. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.119 E01
- Issued
- Feb 3, 2015
- Abate by
- Mar 8, 2016
- Penalty
- Initial $7,000 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.119(e)(1): The process hazard analysis did not identify, evaluate, and address the control of the hazards involved in the process: (a) At Diodes Fabtech Inc. on or about October 27, 2014 had not identified even if the company fell under OSHA's Process Safety Management Standard or if they had chemicals present that were on the list of highly hazardous chemicals. They had not addressed the control of the hazards of the chemicals in the process. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $3500
- — Z (S) $7000
1910.119 L01
- Issued
- Feb 3, 2015
- Abate by
- Mar 8, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.119(l)(1): The employer did not establish or implement written procedures to manage changes to process chemicals, technology, equipment, and procedures, and changes to facilities that affect a covered process: (a) At Diodes Fabtech Inc. on or about October27, 2014 did not develop and implement procedures to manage changes to the TCS covered process. Changes to the process were made including changing of piping, adding monitoring equipment, and changing two valves. A strap was installed in each of the cabinets used for dispensing the TCS with the intent of it being used to prevent movement of the drum of TCS. No management of change had been done to determine if the non use of the safety strap created any hazard. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.119 N
- Issued
- Feb 3, 2015
- Abate by
- Mar 8, 2015
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.119(n): The employer did not establish and implement an emergency plan for the entire plant in accordance with the provisions of 29 CFR 1910.38: (a) At Diodes Fabtech Inc. on or about December 15, 2014 the facility was covered under the Process Safety Management standard due to chemicals being store that were on the PSM list of chemicals and at a volume greater than the threshold limit. The same area contained numerous chemicals, some of which were highly corrosive, some pyrogenic, some flammable, some explosive, and some toxic. The hazards of all of these gases and their potential for being released during an emergency event had not been fully considered in selecting areas for sheltering in place and/or evacuation. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $7000
1910.253 B02 II
- Issued
- Feb 3, 2015
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.253(b)(2)(ii): Assigned storage spaces for cylinders was not located where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons: (a) At Diodes Fabtech Inc. on or about December 15, 2014 compressed gas cylinders were not stored in a manner that would prevent cylinders from being knocked over or damaged.
Recent events (2)
- — I (S) $0
- — Z (S) $5000
1910.307 C
- Issued
- Feb 3, 2015
- Abate by
- Feb 16, 2015
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location: (a) At Diodes Fabtech Inc. on or about December 15, 2014 a light fixture in the "gas storage" area did not have a glass cover and was not intrinsically safe. This was an area that stored flammable chemicals and could be expected to have concentrations above the LEL at times, a Class I, Division II area.
Recent events (2)
- — I (S) $0
- — Z (S) $5000
More inspections at Diodes Fabtech INC
View Diodes Fabtech INC's full OSHA safety record →
More inspections in this industry (NAICS 334413)
Jun 29, 2026
Tokyo Electron · ALBANY, NY
Jun 9, 2026
Hemlock Semiconductor Operations LLC · HEMLOCK, MI
Apr 30, 2026
Utac · HAYWARD, CA
Apr 28, 2026
Micron Technology, INC. · MANASSAS, VA
Apr 22, 2026
Integrated Circuit Systems · IMPERIAL, PA
More inspections in MO
Jul 17, 2026
United Parcel Service · SAINT LOUIS, MO
Jul 15, 2026
Triple J Construction, LLC. · PLATTE CITY, MO
Jul 14, 2026
Torchylo Builders, LLC. · CLINTON, MO
Jul 13, 2026
Jorge Merida · BLUE SPRINGS, MO
Jul 9, 2026
Niagara Bottling · KANSAS CITY, MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340042050.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.