Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MANNY CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MANNY CONSTRUCTION in 975 N. HAMILTON RD., GAHANNA, OH 43230 (NAICS 238130). OSHA activity number 340046937.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Manny Construction — free Get an email when a new federal OSHA severe-injury report for Manny Construction is published. One employer, no account, unsubscribe in one click.
Establishment
MANNY CONSTRUCTION
Site address
975 N. HAMILTON RD.
City
GAHANNA
State
OH
ZIP
43230
Mailing
1475 MASSIEVILLE ROAD, CHILLICOTHE, OH 45601
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

6 citations on file for this inspection.

1903.19 C01

Deleted Other-than-serious 1 instance 3 exposed
Issued
Feb 3, 2015
Abate by
Mar 8, 2015
Penalty
Initial $400 · Current $0 Reduced
29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section:  a.  The employer has failed to submit abatement certification within ten days of the abatement date, December 10, 2014, for a violation of 29 CFR 1926.100(a), issued as citation 1, item 1, and described as follows:  Located at 975 North Hamilton Road in Gahanna, Ohio, employees were exposed to falling tools and roofing material while working below a roof's edge without head protection. Such tools and materials included hammers, circular saw, air nailer, sheathing boards, etc.
Recent events (2)
  • — I (O) $0
  • — Z (O) $400

1903.19 D01

Deleted Other-than-serious 1 instance 4 exposed
Issued
Feb 3, 2015
Abate by
Mar 8, 2015
Penalty
Initial $400 · Current $0 Reduced
29 CFR 1903.19(d)(1): The employer must submit to the Agency, along with the information on abatement certification required by paragraph (c)(3) of this section, documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required:  a.  The employer has failed to submit abatement certification and documentation within ten days of the abatement date, December 10, 2014, for a violation of 29 CFR 1926.501(b)(11), issued as citation 1, item 3, and described as follows:  Located at 975 North Hamilton Road in Gahanna, Ohio, employees were working on a six inch on 12 inch pitched roof installing sheathing without fall protection, thereby exposing the employees to a fall hazard of approximately ten feet.  b.  The employer has failed to submit abatement certification and documentation within ten days of the abatement date, December 10, 2014, for a violation of 29 CFR 1926.602(c)(1)(ii), issued as citation 1, item 4, and described as follows:  Located at 975 North Hamilton Road in Gahanna, Ohio, employees were hoisting a wooden truss into place by directly attaching (free rigging) the eye of a polyester webbed sling to the fork of a CAT rough terrain forklift.
Recent events (2)
  • — I (O) $0
  • — Z (O) $400

1926.100 A

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 28, 2014
Abate by
Dec 10, 2014
Penalty
Initial $2,000 · Current $800 Reduced
29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets.  a. Located at 975 North Hamilton Road in Gahanna, Ohio, employees were exposed to falling tools and roofing material while working below a roof's edge without head protection. Such tools and materials included hammers, circular saw, air nailer, sheathing boards, etc.
Recent events (2)
  • — I (S) $800
  • — Z (S) $2000

1926.102 A01

Serious Gravity 10 1 instance 3 exposed
Issued
Nov 28, 2014
Penalty
Initial $2,800 · Current $1,120 Reduced
29 CFR 1926.102(a)(1): Employees shall be provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents.  a. Located at 975 North Hamilton Road in Gahanna, Ohio, employees were using a pneumatic nailer without eye protection, thereby exposing employees to a stuck-by hazard.
Recent events (2)
  • — I (S) $1120
  • — Z (S) $2800

1926.501 B11

Serious Gravity 10 1 instance 5 exposed
Issued
Nov 28, 2014
Abate by
Dec 10, 2014
Penalty
Initial $2,800 · Current $1,120 Reduced
29 CFR 1926.501(b)(11): "Steep roofs." Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems.  a. Located at 975 North Hamilton Road in Gahanna, Ohio, employees were working on a 6 inch on 12 inch pitched roof installing sheathing without fall protection, thereby exposing the employees to a fall hazard of approximately 10 feet.
Recent events (2)
  • — I (S) $1120
  • — Z (S) $2800

1926.602 C01 II

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 28, 2014
Abate by
Dec 10, 2014
Penalty
Initial $1,600 · Current $640 Reduced
29 CFR 1926.602(c)(1)(ii): No modifications or additions which affect the capacity or safe operation of the equipment shall be made without the manufacturer's written approval. If such modifications or changes are made, the capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly. In no case shall the original safety factor of the equipment be reduced.  a. Located at 975 North Hamilton Road in Gahanna, Ohio, employees were hoisting a wooden truss into place by directly attaching (free rigging) the eye of a polyester webbed sling to the fork of a CAT rough terrain forklift.
Recent events (2)
  • — I (S) $640
  • — Z (S) $1600

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340046937.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.