OKLAHOMA CITY, OK —
OSHA Inspection: ALL TOOLS COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ALL TOOLS COMPANY in 216 N. QUAPAH AVE., OKLAHOMA CITY, OK 73107 (NAICS 332116). OSHA activity number 340048149.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALL TOOLS COMPANY
- Site address
- 216 N. QUAPAH AVE.
- City
- OKLAHOMA CITY
- State
- OK
- ZIP
- 73107
- Mailing
- 216 N. QUAPAH AVE., OKLAHOMA CITY, OK 73107
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 11
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Jan 8, 2015
- Abate by
- Jun 1, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about October 28, 2014, and times prior thereto, guards were not provided for the following machines. Employees were exposed to the hazard of being caught in the point of operation and/or struck by rotating saw blade. a) 35 Multi Slide #3 - Proximity guard was not working properly b) Unused portion of blade was not guarded on band saw
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.303 B02
- Issued
- Jan 8, 2015
- Abate by
- Jun 1, 2015
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: On or about October 28, 2014, and times prior thereto, metal outlet boxes with knockouts were not being used in accordance with listing and labeling instructions. Employees were exposed to the hazard of electric shock.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.303 G02 I
- Issued
- Jan 8, 2015
- Abate by
- Mar 2, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosures, or other means listed under this provision: On or about October 28, 2014, and times prior thereto, metal electrical switch box on band saw did not have a faceplate. Employees were exposed to the hazard of electric shock.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B02 I
- Issued
- Jan 8, 2015
- Abate by
- Mar 2, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: On or about October 28, 2014, and times prior thereto, junction boxes in the production area were not provided with covers approved for the purpose. Employees were exposed to the hazard of electric shock and/or the hazards associated with fire.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L04 I
- Issued
- Jan 8, 2015
- Abate by
- May 15, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(i): Refresher training, including an evaluation of the effectiveness of that training, was not conducted as required by paragraph (l)(4)(ii) to ensure that the operator had the knowledge and skills needed to operate the powered industrial truck safely: On or about October 28, 2014, and times prior thereto, refresher training was not provided for all powered industrial truck operators at least every 3 years. Employees were exposed to the hazard of being stuck by falling load and/or struck by powered industrial truck.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at ALL Tools Company
View ALL Tools Company's full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340048149.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.