BUTTE, MT —
OSHA Inspection: CONTINENTAL STEEL WORKS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CONTINENTAL STEEL WORKS, INC. in 1400 E. STREET, BUTTE, MT 59701 (NAICS 331221). OSHA activity number 340056241.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONTINENTAL STEEL WORKS, INC.
- Site address
- 1400 E. STREET
- City
- BUTTE
- State
- MT
- ZIP
- 59701
- Mailing
- 1400 E. STREET, BUTTE, MT 59701
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331221
- Employees
- 12
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.107 C02
- Issued
- Dec 3, 2014
- Abate by
- Dec 30, 2014
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.107(c)(2): 29 CFR 1910.107(c)(2): Open flame(s) or spark producing equipment were located in the spraying area(s): a) Spray Room; On or about October 30, 2014 and at times prior, employees were exposed to fire and explosion hazards while spray painting with flammable liquids such as but not limited to; Xylene; Shop-Prime Fast Dry Red Primer; MACROPOXY 646 Fast Cure Epoxy Coating, while using a Triangle/Engineers Heat Buster 51 inch shop fan as the exhaust fan.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1910.107 C06
- Issued
- Dec 3, 2014
- Abate by
- Dec 30, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(c)(6): Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area as herein defined were not explosion-proof type approved for Class I, group D locations and did not otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations: a) Spray Room; On or about October 30, 2014 and at times prior, employees were exposed to fire and explosion hazards while spray painting with flammable liquids such as but not limited to; Xylene; Shop-Prime Fast Dry Red Primer; MACROPOXY 646 Fast Cure Epoxy Coating, when non explosion proof electrical receptacles were used to power paint mixing electrical drills.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.107 C07
- Issued
- Dec 3, 2014
- Abate by
- Dec 30, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(c)(7): Electric lamps outside of but within 20 feet of spraying area(s), and not separated therefrom by partition(s), were not totally enclosed to prevent the falling of hot particles: a) Spray Room; On or about October 30, 2014 and at times prior, employees were exposed to fire and explosion hazards while spray painting with flammable liquids such as but not limited to; Xylene; Shop-Prime Fast Dry Red Primer; MACROPOXY 646 Fast Cure Epoxy Coating, when non enclosed shop lights were used to illuminate the spray room.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Continental Steel Works, INC.
View Continental Steel Works, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331221)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340056241.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.