WAUKESHA, WI —
OSHA Inspection: J & L FIBER SERVICES, INC.
Follow-up inspection · Health discipline
At a glance
On , OSHA opened a follow-up health inspection of J & L FIBER SERVICES, INC. in 831 PROGRESS AVE., WAUKESHA, WI 53186 (NAICS 331513). OSHA activity number 340069012.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J & L FIBER SERVICES, INC.
- Site address
- 831 PROGRESS AVE.
- City
- WAUKESHA
- State
- WI
- ZIP
- 53186
- Mailing
- 831 PROGRESS AVE., WAUKESHA, WI 53186
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331513
- Employees
- 80
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.169 B03 I
- Issued
- May 5, 2015
- Abate by
- May 11, 2015
- Penalty
- Initial $4,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.169(b)(3)(i): Compressed air receiver(s) were not equipped with one or more spring-loaded safety valves: (a) The four air receivers located over the GF molding work station had no spring-loaded pressure relieving safety valves.
Recent events (2)
- — I (S) $0
- — Z (S) $4000
1910.212 A01
- Issued
- May 5, 2015
- Abate by
- May 15, 2015
- Penalty
- Initial $6,000 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) The mold assembly machine had a 71-inch wide fixed barrier that had a 28-inch opening, exposing employees to a hazard. (b) The mold assembly machine had an access door that was not interlocked, exposing employees to a hazard.
Recent events (2)
- — I (S) $4000
- — Z (S) $6000
1910.303 B02
- Issued
- May 5, 2015
- Abate by
- May 11, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) Near the mold stacker at MA13 the approximately 1 1/2 inch electrical conduit had come apart about 8 feet above the floor.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G01 IV A
- Issued
- May 5, 2015
- Abate by
- May 11, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: (a) In the cleaning department along the back wall next to the two heavy grinders, the extension cord for the wall light was wrapped around the overhead door track.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at J & L Fiber Services, INC.
View J & L Fiber Services, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331513)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340069012.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.