CROYDON, PA —
OSHA Inspection: B-TEC SOLUTIONS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of B-TEC SOLUTIONS in 913 CEDAR AVE., CROYDON, PA 19021 (NAICS 332721). OSHA activity number 340078732.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- B-TEC SOLUTIONS
- Site address
- 913 CEDAR AVE.
- City
- CROYDON
- State
- PA
- ZIP
- 19021
- Mailing
- 913 CEDAR AVE., CROYDON, PA 19021
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332721
- Employees
- 110
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.213 C01
- Issued
- Jan 26, 2015
- Abate by
- Feb 12, 2015
- Penalty
- Initial $3,060 · Current $2,295 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Production Work Area/Shipping & Receiving Area: On or about November 12, 2014, an employee used a Sears Craftsman 10-inch table saw which was missing a hood/blade guard, exposing the operator to a severe laceration hazard from the unguarded portion of the blade.
Recent events (2)
- — I (S) $2295
- — Z (S) $3060
1910.213 C02
- Issued
- Jan 26, 2015
- Abate by
- Feb 12, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) Production Work Area/Shipping & Receiving Area: On or about November 12, 2014, an employee used a Sears Craftsman 10-inch table saw which was missing a spreader necessary protect the operator from blunt force trauma hazards in the event of a material kickback.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Jan 26, 2015
- Penalty
- Initial $3,060 · Current $2,295 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Production Work Area/Tool Grinding Area: On or about November 12, 2014, an employee used a K. O. Lee Motorized Work Head machine which had a unguarded pulley located 4 feet from the floor or working platform, exposing employees to an entanglement and nip point hazard.
Recent events (2)
- — I (S) $2295
- — Z (S) $3060
1910.219 E01 I
- Issued
- Jan 26, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: a) Production Work Area/Tool Grinding Area: On or about November 12, 2014, an employee used a K. O. Lee Motorized Work Head machine which had an unguarded belt 4 feet from the floor or working platform, exposing employees to an entanglement and nip point hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F03
- Issued
- Jan 26, 2015
- Abate by
- Feb 12, 2015
- Penalty
- Initial $3,825 · Current $2,869 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: a) Production Work Area/Tool Grinding Area: On or about November 12, 2014, an employee operated a CNC Mazak vertical mill machine which had a missing sprocket wheel and chain guard located 4 feet from the floor or working platform, exposing employees to a crushing and nip point hazard.
Recent events (2)
- — I (S) $2868.75
- — Z (S) $3825
1910.1200 F06
- Issued
- Jan 26, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(6): The employer used written materials, such as signs, placards, process sheets, or batch tickets in lieu of affixing labels to individual stationary process containers that failed to identify the container(s) to which they were applicable and did not convey the information required by 29 CFR 1910.1200(f)(5): a) Production Work Area: On or about November 12, 2014, an employee used a 16 ounce spray bottle which was filled with Renoform Syn 7940, but the bottle was not labeled, tagged or marked to indicate its contents.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332721)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340078732.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.