PAGO PAGO, AS —
OSHA Inspection: CBT HO CHING & CO., INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CBT HO CHING & CO., INC. in LUMBER YD AT TAFUNA INDUSTRIAL PARK LUMBER YARD, PAGO PAGO, AS 96799 (NAICS 423310). OSHA activity number 340136191.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CBT HO CHING & CO., INC.
- Site address
- LUMBER YD AT TAFUNA INDUSTRIAL PARK LUMBER YARD
- City
- PAGO PAGO
- State
- AS
- ZIP
- 96799
- Mailing
- P.O. BOX 1359, PAGO PAGO, AS 96799
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423310
- Employees
- 36
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.303 F02
- Issued
- Mar 20, 2015
- Abate by
- Apr 1, 2015
- Penalty
- Initial $1,339 · Current $937 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: a. On December 8, 2014, in the shop behind the warehouse, the employer did not mark the circuit breakers to indicate its purpose.
Recent events (2)
- — I (S) $937.3
- — Z (S) $1339
1910.305 B01 II
- Issued
- Mar 20, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a. On December 8, 2014, in the shop behind the warehouse, an unused opening on the lower side and under the control panel of the main switch were not effectively closed.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01
- Issued
- Mar 20, 2015
- Penalty
- Initial $1,339 · Current $937 Reduced
General-duty citation text
29 CFR 1910.178(l)(1):The employer did not ensure that each power industrial truck operator was competent to operate a power industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in paragraph (1): a. On December 8, 2014, the employer did not provide forklift training and evaluation for the forklift operators at the lumberyard and warehouse.
Recent events (2)
- — I (S) $937.3
- — Z (S) $1339
1910.178 P01
- Issued
- Mar 20, 2015
- Abate by
- Apr 15, 2015
- Penalty
- Initial $1,575 · Current $1,103 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s) a. On December 8, 2014, in the lumberyard, the solid tires of the Caterpillar forklift were chipped and worn. b. On December 8, 2014, in the lumberyard, the load backrest of the Caterpillar forklift was missing.
Recent events (2)
- — I (S) $1102.5
- — Z (S) $1575
1910.37 B05
- Issued
- Mar 20, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(5): Each doorway or passage along an exit access that could be mistaken for an exit was not marked "Not an Exit" or similar designation, or be identified by a sign indicating its actual use (e.g. closet): a. On December 8, 2014, inside the warehouse, the door leading to the plumbing storage room was not identified to prevent confusing the door as an exit.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.132 A
- Issued
- Mar 20, 2015
- Abate by
- Apr 1, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: a. On December 8, 2014; hand protection was not used when employees were handling treated lumber and long metal rebar.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.184 E01
- Issued
- Mar 20, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(e)(1): Alloy steel sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach: a) On December 8, 2014, in the lumber yard, alloy steel chain being used with the forklift to pick up or hoist loads did not have a tag to show the size, grade and rated capacity of the chain.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at CBT HO Ching & CO., INC.
View CBT HO Ching & CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423310)
More inspections in AS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340136191.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.