TUPELO, MS —
OSHA Inspection: CUSTOMED ENGINEERED WHEELS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CUSTOMED ENGINEERED WHEELS, INC. in 735A NORTH EASON BLVD., TUPELO, MS 38804 (NAICS 326199). OSHA activity number 340140763.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CUSTOMED ENGINEERED WHEELS, INC.
- Site address
- 735A NORTH EASON BLVD.
- City
- TUPELO
- State
- MS
- ZIP
- 38804
- Mailing
- 735A NORTH EASON BLVD., TUPELO, MS 38804
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 74
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.23 C01
- Issued
- Mar 20, 2015
- Abate by
- Mar 30, 2015
- Penalty
- Initial $7,000 · Current $4,200 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floor(s) or platform(s) 4 feet (1.22 m) or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(e)(3)(i) through (v)), on all open sides: (a) Molding machine number 6 - On or about December 11, 2014, employees were exposed to falls from the unguarded end of a platform and while walking on the top of the molding machine to plug and unplug the molds.
Recent events (2)
- — I (S) $4200
- — Z (S) $7000
1910.303 G02 I
- Issued
- Mar 20, 2015
- Abate by
- Mar 30, 2015
- Penalty
- Initial $2,250 · Current $1,350 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosures, or other means listed under this provision: (a) Cell #12 and 13 - On or about December 11, 2014, a plug on a flexible cord was not fully plugged into a receptacle on another flexible cord was not completely inserted leaving the live parts of the prongs exposed.
Recent events (2)
- — I (S) $1350
- — Z (S) $2250
1910.305 G01 IV A
- Issued
- Mar 20, 2015
- Abate by
- Apr 6, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: (a) Cell #12 and 13 - On or about December 11, 2014, a flexible core was ran over a passage way to supply electricity from a molding machine to the conveyor between two molding machines.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G02 III
- Issued
- Mar 20, 2015
- Abate by
- Mar 30, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a) Cell #12 and 13 - On or about December 11, 2014, the conveyor flexible cord on the plug end had a defective strain relief.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Customed Engineered Wheels, INC.
View Customed Engineered Wheels, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340140763.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.