Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BRITTAIN MACHINE INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BRITTAIN MACHINE INC. in 2520 S. SHERIDON ST., WICHITA, KS 67217 (NAICS 333514). OSHA activity number 340144484.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Brittain Machine INC. — free Get an email when a new federal OSHA severe-injury report for Brittain Machine INC. is published. One employer, no account, unsubscribe in one click.
Site address
2520 S. SHERIDON ST.
City
WICHITA
State
KS
ZIP
67217
Mailing
2520 S. SHERIDON ST., WICHITA, KS 67217
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333514
Employees
145
Ownership type
A

4 citations on file for this inspection.

1910.147 C06 I

Serious Gravity 5 1 instance 5 exposed
Issued
Jan 28, 2015
Abate by
Mar 3, 2015
Penalty
Initial $3,060 · Current $2,142 Reduced
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedures at least annually to ensure that the procedure and the requirement of this standard were being followed:  The employer did not ensure that (as a minimum) an annual periodic inspection of the Lockout/Tagout Procedures were performed and documented as required. Employees were exposed to the hazards of being struck-by unexpectedly energized equipment.
Recent events (2)
  • — I (S) $2142
  • — Z (S) $3060

1910.179 J03

Serious Gravity 5 7 instances 2 exposed
Issued
Jan 28, 2015
Abate by
Feb 24, 2015
Penalty
Initial $3,060 · Current $2,142 Reduced
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months:  The annual inspection of the cranes had not been performed since 2011.     a) OMI 10 Ton Bridge crane - Building #3 Northeast     b) DeMag 10 Ton Bridge Crane - Building # 3 Northwest     c) DeMag 10 Ton Bridge Crane - Building # 3 Southwest     d) Abell-Howe 2 Ton Jib Crane - Building # 1 near Machine 132     e) CM 1/2 Ton Jib Crane - Building # 1 Maintenance     f) CM 1/2 Ton Jib Crane - Building # 1     g) CM/Spanco 2 Ton Jib Crane - Building # 1 Near Machine 141
Recent events (2)
  • — I (S) $2142
  • — Z (S) $3060

1910.212 A01

Serious Gravity 1 2 instances 2 exposed
Issued
Jan 28, 2015
Abate by
Feb 24, 2015
Penalty
Initial $2,295 · Current $1,607 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  In the shop area the employer did not ensure that guards were utilized on the two Small Five-Axis milling machines. Employees were exposed to the hazard of being struck by flying ships and/or broken/loose cutters.
Recent events (2)
  • — I (S) $1606.5
  • — Z (S) $2295

1910.178 L06

Other-than-serious 1 instance 25 exposed
Issued
Jan 28, 2015
Abate by
Apr 13, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(6): The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.  The employer did not create and maintain certification that each operator had been trained and evaluated as required.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Brittain Machine INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340144484.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.