WATERBURY, CT —
OSHA Inspection: EASTCOAST CENTERLESS GRINDING, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of EASTCOAST CENTERLESS GRINDING, LLC in 3821 EAST MAIN ST, WATERBURY, CT 06705 (NAICS 333517). OSHA activity number 340154152.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EASTCOAST CENTERLESS GRINDING, LLC
- Site address
- 3821 EAST MAIN ST
- City
- WATERBURY
- State
- CT
- ZIP
- 06705
- Mailing
- 3821 EAST MAIN ST, WATERBURY, CT 06705
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333517
- Employees
- 13
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.132 D01
- Issued
- May 26, 2015
- Abate by
- Jun 12, 2015
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): Location: 3821 East Main Street, Waterbury, CT 06705 A written hazard assessment of the workplace was not conducted to determine the hazards that were present and any PPE that would be required to protect employees from these hazards.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1910.133 A01
- Issued
- May 26, 2015
- Abate by
- Jun 12, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: Location: 3821 East Main Street, Waterbury, CT 06705 Each employee exposed to potential eye injuries, while performing job duties such as but not limited to operating the centerless grinders, was not provided with and required to wear eye protection.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.157 C04
- Issued
- May 26, 2015
- Abate by
- Jun 19, 2015
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.157(c)(4): Portable fire extinguishers were not maintained in a fully charged and operable condition: Location: 3821 East Main Street, Waterbury, CT 06705 Each portable fire extinguisher was not maintained in a fully changed and good condition.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1910.157 E03
- Issued
- May 26, 2015
- Abate by
- Jun 19, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: Location: 3821 East Main Street, Waterbury, CT 06705 Portable fire extinguishers were not inspected on an annual basis.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.157 E02
- Issued
- May 26, 2015
- Abate by
- Jun 19, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly: Location: 3821 East Main Street, Waterbury, CT 06705 Portable fire extinguishers were not checked monthly to ensure that they were in proper working order.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 D01
- Issued
- May 26, 2015
- Abate by
- Jun 12, 2015
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.215(d)(1): Wheel(s) on grinding machine(s) were not sounded (ring test) and inspected for damage before mounting: Location: 3821 East Main Street, Waterbury, CT 06705 Abrasive grinding wheels, ranging between 14 and 20 inches in diameter, were not subjected to a ring test prior to use on the centerless grinding machines.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
More inspections at Eastcoast Centerless Grinding, LLC
View Eastcoast Centerless Grinding, LLC's full OSHA safety record →
More inspections in this industry (NAICS 333517)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340154152.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.