VICKSBURG, MS —
OSHA Inspection: MAGNOLIA METAL & PLASTIC PRODUCTS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MAGNOLIA METAL & PLASTIC PRODUCTS, INC. in 247 ARMORY DRIVE, VICKSBURG, MS 39183 (NAICS 332321). OSHA activity number 340158559.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MAGNOLIA METAL & PLASTIC PRODUCTS, INC.
- Site address
- 247 ARMORY DRIVE
- City
- VICKSBURG
- State
- MS
- ZIP
- 39183
- Mailing
- 247 ARMORY DRIVE, VICKSBURG, MS 39183
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332321
- Employees
- 35
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.22 A02
- Issued
- Mar 4, 2015
- Abate by
- Mar 12, 2015
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.22(a)(2): Floors(s) of workroom(s) were not maintained, so far as possible, in a dry condition. a) V-11 Line Oiler - On or about December 30, 2014, oil was on the floor at the end of the machine in front of small control panel.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.305 G02 III
- Issued
- Mar 4, 2015
- Abate by
- Mar 19, 2015
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws. a) Bliss C-45 Press - On or about December 30, 2014,The power cord outer insulation had pulled loose from the plug. The weight of the power cord was supported by the power cord wiring and terminal connection.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.22 B02
- Issued
- Mar 4, 2015
- Abate by
- Mar 19, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(b)(2): Permanent aisles and passageways were not appropriately marked: a) Plant Area - On or about December 30, 2014, the aisle and passageways were not appropriately marked. The aisle and passageways were marked at one time but the paint had worn away.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 B01 II
- Issued
- Mar 4, 2015
- Abate by
- Mar 19, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) C-45 Press Feeder - On or about December 30, 2014, the switch box for the press feeder had an unused opening on the top and sided of the box.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Magnolia Metal & Plastic Products, INC.
View Magnolia Metal & Plastic Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332321)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340158559.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.