SAN ANTONIO, TX —
OSHA Inspection: STEVES & SONS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of STEVES & SONS, INC. in 203 HUMBLE AVE., SAN ANTONIO, TX 78225 (NAICS 321911). OSHA activity number 340170034.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Steves & Sons, INC. — free
Get an email when a new federal OSHA severe-injury report for Steves & Sons, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- STEVES & SONS, INC.
- Site address
- 203 HUMBLE AVE.
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78225
- Mailing
- P. O. BOX 1866, SAN ANTONIO, TX 78211
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 150
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.23 A08 I
- Issued
- Mar 18, 2015
- Abate by
- Mar 24, 2015
- Penalty
- Initial $6,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.23(a)(8)(i): Every floor hole into which persons could accidentally walk were not guarded by a standard railing with standard toeboard on all exposed sides: (a) Lay Up area Line 1, on or about January 08, 2015 and times prior there to, employees were exposed to fall hazards greater than 4 feet in height to the concrete level below when the wall opening of the scissor lift was not guarded, while assembling doors on the scissor lift table. (b) Lay Up area Line 2, on or about January 08, 2015 and times prior there to, employees were exposed to fall hazards greater than 4 feet in height to the concrete level below when the wall opening of the scissor lift was not guarded, while assembling doors on the scissor lift table. (c) Lay Up area Line 3, on or about January 08, 2015 and times prior there to, employees were exposed to fall hazards greater than 4 feet in height to the concrete level below when the wall opening of the scissor lift was not guarded, while assembling doors on the scissor lift table. (d) Lay Up area Line 4, on or about January 08, 2015 and times prior there to, employees were exposed to fall hazards greater than 4 feet in height to the concrete level below when the wall opening of the scissor lift was not guarded, while assembling doors on the scissor lift table. (e) Lay Up Area Line 5, on or about January 08, 2015 and times prior thereto, employees were exposed to fall hazards when the open pit for the scissor lift next to the glue spreader machine in Line 5, was removed, left open and unguarded, while cleaning the pit. (f) Lay Up area Line 6, on or about January 08, 2015 and times prior there to, employees were exposed to fall hazards greater than 4 feet in height to the concrete level below when the wall opening of the scissor lift was not guarded, while assembling doors on the scissor lift table. (g) Lay Up area Line 7, on or about January 08, 2015 and times prior there to, employees were exposed to fall hazards greater than 4 feet in height to the concrete level below when the wall opening of the scissor lift was not guarded, while assembling doors on the scissor lift table.
Recent events (3)
- — F (S) $0
- — C (S) $6000
- — Z (S) $6000
1910.147 A03 I
- Issued
- Mar 18, 2015
- Abate by
- Mar 28, 2015
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
29 CFR 1910.147(a)(3)(i): The employer did not utilize procedures for affixing appropriate lockout devices or tagout devices to energy isolating devices, and to otherwise disable machines or equipment to prevent unexpected energization, start up or release of stored energy in order to prevent injury to employees: (a) Lay Up area Line 6, On or about January 08, 2015 and times prior thereto, employees were exposed to amputation hazards when glue spreader machines, such as but not limited to: Black Brothers Co. glue spreader SADP 50, were not locked-out and guards were by-passed, while cleaning the rotating rollers. (b) Lay Up area Line 7, On or about January 08, 2015 and times prior thereto, employees were exposed to amputation hazards when glue spreader machines, such as but not limited to: Black Brothers Co. glue spreader SADP 50, were not locked-out and guards were by-passed, while cleaning the rotating rollers.
Recent events (3)
- — F (O) $5000
- — C (S) $5000
- — Z (S) $5000
1910.212 A03 II
- Issued
- Mar 18, 2015
- Abate by
- Mar 24, 2015
- Penalty
- Initial $7,000 · Current $7,000
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: (a) Lay Up area Line 4, On or about January 08, 2015 and times prior thereto; employees were exposed to amputation hazards when the guards of the glue spreader machines such as but not limited to: Black Brothers Co. glue spreader SADP 50, were not completely covering the rotating rollers, while cleaning the glue spreader machines. (b) Lay Up area Line 6, On or about January 08, 2015 and times prior thereto; employees were exposed to amputation hazards when the guards of the glue spreader machines such as but not limited to: Black Brothers Co. glue spreader SADP 50, were not completely covering the rotating rollers, while cleaning the glue spreader machines. (c) Lay Up area Line 7, On or about January 08, 2015 and times prior thereto; employees were exposed to amputation hazards when the guards of the glue spreader machines such as but not limited to: Black Brothers Co. glue spreader SADP 50, were not completely covering the rotating rollers, while cleaning the glue spreader machines.
Recent events (3)
- — F (O) $7000
- — C (S) $7000
- — Z (S) $7000
1910.219 C04 I
- Issued
- Mar 18, 2015
- Abate by
- Mar 24, 2015
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
29 CFR 1910.219(c)(4)(i): Shaft ends projecting more than one-half the diameter of the shaft were not guarded by nonrotating caps or safety sleeves: (a) Lay Up area Line 6, On or about January 08, 2015 and times prior thereto, employees were exposed to caught in-between hazards when the shaft ends on the glue spreader machines, such as but not limited to: Black Brothers Co. glue spreader SADP 50, were projecting 1-1/8 inch on a 1-1/2 inch diameter shaft end, while cleaning the machines. (b) Lay Up area Line 7, On or about January 08, 2015 and times prior thereto, employees were exposed to caught in-between hazards when the shaft ends on the glue spreader machines, such as but not limited to: Black Brothers Co. glue spreader SADP 50, were projecting 1-1/8 inch on a 1-1/2 inch diameter shaft end, while cleaning the machines.
Recent events (3)
- — F (O) $5000
- — C (S) $5000
- — Z (S) $5000
More inspections at Steves & Sons, INC.
Jan 13, 2026
SANDSTON, VA
Oct 1, 2020
LEBANON, TN
Jan 12, 2017
LEBANON, TN
Nov 3, 2016
LEBANON, TN
Jul 10, 2015
LEBANON, TN
View Steves & Sons, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321911)
Jul 13, 2026
A09cs000012spceaas - Andersen Window & Doors · DUBUQUE, IA
Jul 8, 2026
Murphy Door · WEST HAVEN, UT
Jul 1, 2026
111513 - Custom Panel Doors INC · MILACA, MN
Jun 23, 2026
Central Woodwork, INC. · NASHVILLE, TN
Jun 1, 2026
161281 - Appwood, LLC · MORGANTON, NC
More inspections in TX
Jul 17, 2026
Cornelius Nurseries, INC. · RICHMOND, TX
Jul 17, 2026
Holloway Houston, INC. · HOUSTON, TX
Jul 17, 2026
Voluntary Purchasing Groups, INC. · BONHAM, TX
Jul 16, 2026
Rnwbl · SNYDER, TX
Jul 16, 2026
United Rentals, INC. · WICHITA FALLS, TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340170034.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.