Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,991Inspections Most recent open 2026-08-24 Last loaded 2026-08-27

OSHA Inspection: J.C.D. TAPING CORP.

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of J.C.D. TAPING CORP. in 16 MORTON STREET, NEW YORK, NY 10014 (NAICS 236116). OSHA activity number 340178060.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch J.C.D. Taping Corp. for free Get an email when a new federal OSHA severe-injury report for J.C.D. Taping Corp. is published. One employer, no account, unsubscribe in one click.
Establishment
J.C.D. TAPING CORP.
Site address
16 MORTON STREET
City
NEW YORK
State
NY
ZIP
10014
Mailing
2410 FULLER STREET, BRONX, NY 10461
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236116
Employees
4
Ownership type
Private (A)

8 citations on file for this inspection.

1926.501 A02

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 5, 2015
Abate by
Feb 18, 2015
Penalty
Initial $2,800 · Current $2,192 Reduced
29 CFR 1926.501(a)(2): The employer did not determine if the walking/working surfaces on which its employees were to work on, had the strength and structure integrity to support employees safely:     Location: 16 Morton Street NY, NY / 3rd floor    On or about: August 14, 2014    a) Workers were working from a surface that was part of the demolished stairwell system. As the employees were hoisting up a beam, the working surface collapsed and the employees were injured.
Recent events (2)
  • · I (S) $2192
  • · Z (S) $2800

1926.855 D

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 5, 2015
Abate by
Feb 18, 2015
Penalty
Initial $0 · Current $0
29 CFR 1926.855(d): Stringers of ample strength were not installed to support the flooring planks, and the ends of such stringers were not supported by floor beams or girders, and not by floor arches alone.  Location: 16 Morton Street NY, NY / 3rd floor  On or about: August 14, 2014  a) Employees were manually hoisting materials while standing on a beam with a single piece of plywood placed on top of a partially demolished stairwell system.  The work surface collapsed as the employees were working on it.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.501 B15

Serious Gravity 10 2 instances 4 exposed
Issued
Feb 5, 2015
Abate by
Feb 18, 2015
Penalty
Initial $2,800 · Current $1,800 Reduced
29 CFR 1926.501(b)(15): Each employee on a walking/working surface 6 feet (1.8 meters) or more above lower levels was not protected from falling by a guardrail system, safety net system, or personal fall arrest system:    Location: 16 Morton Street NY, NY / 3rd floor    On or about: August 14, 2014    a) Employees were hoisting material on a beam on the third floor without any guardrail system, safety net or personal fall arrest system.    b) Employees were assisting with hoisting operations of material while standing on a work surface on the second floor without any guardrail system, safety net or personal fall arrest system.
Recent events (2)
  • · I (S) $1800
  • · Z (S) $2800

1926.503 A01

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 5, 2015
Abate by
Feb 18, 2015
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    Location: 16 Morton Street NY, NY / 3rd floor    On or about: August 14, 2014    a) Employees were not trained in the recognition of fall hazards and procedures to eliminate or minimize the fall hazards. Two employees were working on a beam on the third floor and two more employees were on the second floor assisting the workers on the third floor and they did not recognize fall hazards.
Recent events (2)
  • · I (S) $1000
  • · Z (S) $2000

1926.850 A

Serious Gravity 10 1 instance 5 exposed
Issued
Feb 5, 2015
Penalty
Initial $2,800 · Current $1,800 Reduced
29 CFR 1926.850(a): An engineering survey was not performed by a competent person to determine the conditions of the framing floors and walls and the possibility of unplanned collapse of any portion of the structure prior to permitting employees to start demolition operations.      Location: 16 Morton Street NY, NY / 3rd floor    On or about: August 14, 2014    a) Employees conducting demolition activity did not have a competent person conduct and implement an engineering survey to complete the demolition.
Recent events (2)
  • · I (S) $1800
  • · Z (S) $2800

1926.1053 B13

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 5, 2015
Abate by
Feb 18, 2015
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step    Location: 16 Morton Street NY, NY / 3rd floor    On or about: August 14, 2014    a) Employees used the top or top step of a stepladder to climb up to the third floor.
Recent events (2)
  • · I (S) $1000
  • · Z (S) $2000

1926.1053 B01

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 5, 2015
Abate by
Feb 18, 2015
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:    Location: 16 Morton Street NY, NY / 3rd floor    On or about: August 14, 2014    a) Employees were using an extension ladder to access the second floor, it did not extend 3 feet above the upper landing surface.
Recent events (2)
  • · I (S) $2000
  • · Z (S) $2000

1926.1053 B05 I

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 5, 2015
Abate by
Feb 18, 2015
Penalty
Initial $2,000 · Current $0 Reduced
29 CFR 1926.1053(b)(5)(i): Non-self-supporting ladders were not used at an angle such than the horizontal distance from the top support to the foot of the ladder way approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support)    Location: 16 Morton Street NY, NY / 1st floor     On or about: August 14, 2014    a) Employees were utilizing an extension ladder to access the second floor of the project. The ladder was erected with the base too close to the access point.
Recent events (2)
  • · I (S) $0
  • · Z (S) $2000

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340178060.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.