CLEVELAND, TX —
OSHA Inspection: SPLENDORA PIPE SERVICES
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SPLENDORA PIPE SERVICES in 26670 MIDLINE ROAD, CLEVELAND, TX 77328 (NAICS 332996). OSHA activity number 340186949.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPLENDORA PIPE SERVICES
- Site address
- 26670 MIDLINE ROAD
- City
- CLEVELAND
- State
- TX
- ZIP
- 77328
- Mailing
- 26670 MIDLINE ROAD, CLEVELAND, TX 77328
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332996
- Employees
- 120
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.37 A03
- Issued
- Mar 23, 2015
- Abate by
- Apr 9, 2015
- Penalty
- Initial $3,600 · Current $2,160 Reduced
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: The employer does not ensure that exit routes were kept free and unobstructed. This violation was observed on or about January 16, 2015, in the heat treat area where employees were exposed to fire hazards where exit routes were not free and unobstructed. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that exit routes are kept free and unobstructed.
Recent events (2)
- — I (S) $2160
- — Z (S) $3600
1910.147 C04 II B
- Issued
- Mar 23, 2015
- Abate by
- Apr 16, 2015
- Penalty
- Initial $4,500 · Current $2,700 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. The employer does not ensure that the energy control procedures clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. This violation was observed on or about January 16, 2016 in heat treat area #2, where employees were exposed to electrical and struck-by hazards when changing out the band saw blade on the Mada band saw. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps and procedures that will be developed, which specify procedural steps for shutting down, isolating, blocking and securing machines to control hazardous energy.
Recent events (2)
- — I (S) $2700
- — Z (S) $4500
1910.212 A01
- Issued
- Mar 23, 2015
- Abate by
- Apr 9, 2015
- Penalty
- Initial $4,500 · Current $2,700 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. The employer does not protect the operator and other employees in the machine area from hazards such as those created by rotating parts. This violation was observed on or about January 16, 2015 in heat treat area #2 where employees were exposed to struck-by and caught-by hazards when operating a Mada band saw where the unused portion of the blade was not guarded. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure the unused portions of the band saw blade are guarded.
Recent events (2)
- — I (S) $2700
- — Z (S) $4500
1910.305 B02 I
- Issued
- Mar 23, 2015
- Abate by
- Apr 9, 2015
- Penalty
- Initial $3,600 · Current $2,160 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: The employer does not provide covers for pull boxes, junction boxes, and fittings which are approved for the purpose. This violation was observed on or about January 16, 2015, in the heat treat area next to motor #55 where employees were exposed to electrical hazards when operating the conveyor without a cover for the pull box. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that pull boxes, junction boxes, and fittings are provided with covers approved for the purpose.
Recent events (2)
- — I (S) $2160
- — Z (S) $3600
More inspections at Splendora Pipe Services
View Splendora Pipe Services's full OSHA safety record →
More inspections in this industry (NAICS 332996)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340186949.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.