BURGHILL, OH —
OSHA Inspection: HARTFORD BUILDING PRODUCTS LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HARTFORD BUILDING PRODUCTS LLC in 4810 STATE ROUTE 7, BURGHILL, OH 44404 (NAICS 321918). OSHA activity number 340199579.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARTFORD BUILDING PRODUCTS LLC
- Site address
- 4810 STATE ROUTE 7
- City
- BURGHILL
- State
- OH
- ZIP
- 44404
- Mailing
- P.O. BOX 150, BURGHILL, OH 44404
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 11
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Apr 22, 2015
- Abate by
- May 12, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On and before 1/22/2015, the Rockwell drill press in building #3 was not properly safeguarded at the rotating chuck.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.213 H01
- Issued
- Apr 22, 2015
- Abate by
- May 12, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material: On and before 1/22/2015, the Dewalt radial arm saw had the lower portion of the saw blade that was not safeguarded.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.213 I01
- Issued
- Apr 22, 2015
- Abate by
- May 12, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.213(i)(1): Non-working portion(s) of the blade of bandsaw(s) were not enclosed or guarded and the band saw flywheels were not fully encased: On and before 1/22/2015, the Fay Egan vertical bandsaw had 14 inches of the upper portion of the saw blade that was not safeguarded and portions of the upper and lower band saw flywheels were not fully encased.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.215 B09
- Issued
- Apr 22, 2015
- Abate by
- May 12, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On and before 1/22/2015, the Westinghouse abrasive wheel bench grinder in #3 building, had a periphery guard opening of 1.5 inches.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.219 F03
- Issued
- Apr 22, 2015
- Abate by
- May 12, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: On and before 1/22/2015, the Taylor clamp conveyor sprocket and chain assemblies were not safeguarded.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
More inspections in this industry (NAICS 321918)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340199579.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.