Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MUELLER COPPER TUBE CO., INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MUELLER COPPER TUBE CO., INC. in 400 MUELLER ROAD, FULTON, MS 38843 (NAICS 331421). OSHA activity number 340201771.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mueller Copper Tube CO., INC. — free Get an email when a new federal OSHA severe-injury report for Mueller Copper Tube CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
400 MUELLER ROAD
City
FULTON
State
MS
ZIP
38843
Mailing
400 MUELLER ROAD, FULTON, MS 38843
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331421
Employees
400
Ownership type
A

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 17, 2015
Abate by
Apr 8, 2015
Penalty
Initial $5,100 · Current $3,060 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck by hazard.  (a) Jobsite - On or about January 22, 2015 employee was exposed to a stuck by hazard when using a Kent KF4 hydraulic breaker and a Caterpillar 262D skid steer loader to flip a casting furnace lid.
Recent events (2)
  • — I (S) $3060
  • — Z (S) $5100

5(a)(1)

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 17, 2015
Abate by
Apr 8, 2015
Penalty
Initial $0 · Current $0
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck by hazard.  (a) Jobsite - On or about January 22, 2015 employee was exposed to a stuck by hazard when using a Kent KF4 hydraulic breaker and a Caterpillar 262D skid steer loader to flip a casting furnace lid.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C04 II B

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 17, 2015
Abate by
Apr 1, 2015
Penalty
Initial $5,100 · Current $3,060 Reduced
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy    (a) New Press #2 Furnace - On or about January 22, 2015 there were no specific energy control procedures for this machine.
Recent events (2)
  • — I (S) $3060
  • — Z (S) $5100

1910.178 L03 I A

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 17, 2015
Abate by
Apr 8, 2015
Penalty
Initial $5,100 · Current $3,060 Reduced
29 CFR 1910.178(l)(3)(i)(A): Powered industrial truck operators did not receive training on operating instructions, warnings, and precautions for the types of truck the operator was authorized to operate:   (a) Facility - On or about January 22, 2015 employer did not provide training for the operation of a Caterpillar 262D skid steer loader.
Recent events (2)
  • — I (S) $3060
  • — Z (S) $5100

1910.178 L03 I G

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 17, 2015
Abate by
Apr 1, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(3)(i)(G): Powered industrial truck operators did not receive initial training on fork and attachment adaptation, operation, and use limitations;  (a) Facility - On or about January 22, 2015 operators have not been trained on the Kent hydraulic breaker attachement that is used on a Caterpillar 262D skid steer loader.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Mueller Copper Tube CO., INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340201771.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.