OSHA Inspection: DCO ENVIRONMENTAL & RECYCLING INC.

Issued

2015-01-27 00:00:00

Abate by

2015-03-16 00:00:00

Penalty

Initial $4950.00 · Current $4950.00

General-duty citation text

29 CFR 1910.22(d)(1): In every building or other structure, or part thereof, used for mercantile, business, industrial, or storage purposes, the loads approved by the building official were not marked on plates of approved design which were not supplied and securely affixed by the owner of the building, or his duly authorized agent, in a conspicuous place in each space to which they relate:  a/  Inside of the Maintenance Area, the loft above the Parts Room was used for storage.  A suitable placard or the equivalent identifying the safe load limit or its equivalent was not posted.

Issued

2015-01-27 00:00:00

Abate by

2015-03-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.23(e)(1): A standard railing did not consist of top rail, intermediate rail, and posts, and did not have a vertical height of 42 inches nominal from upper surface of top rail to floor, platform, runway, or ramp level.   a/  The stairrailing belonging to the flight of stairs leading up to the main entrance was not equipped with an intermediate rail.

Issued

2015-01-27 00:00:00

Abate by

2015-03-16 00:00:00

Penalty

Initial $4950.00 · Current $4950.00

General-duty citation text

29 CFR 1910.138(a):  Employers did not select and require employees to use appropriate hand protection when employees' hands are exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasions; punctures; chemical burns; thermal burns; and harmful temperature extremes:  a/  Inside of the Warehouse, employees tasked with exchanging the LPG cylinders belonging to fork trucks such as Nissan 50, m/n MAP1F2A25LV, s/n AP1F2900789, were provided with a leather split cowhide glove.  These gloves consisted of a cotton ployester blend that offered minimal protection against the potential hazard of frostbite.

Issued

2015-01-27 00:00:00

Abate by

2015-03-16 00:00:00

Penalty

Initial $4950.00 · Current $4950.00

General-duty citation text

29 CFR 1910.147(c)(1):  The employer did not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  a/  A written lockout/tagout program was not established for the safe, energy isolation of machinery such as the Sterling Gala 6 Cutter Head, unknown m/n or s/n.

Issued

2015-01-27 00:00:00

Abate by

2015-03-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training has been accomplished and is being kept up to date. The certification shall contain each employee's name and dates of training:  a/  Employee training in lockout/tagout had not been certified.

Issued

2015-01-27 00:00:00

Abate by

2015-03-16 00:00:00

Penalty

Initial $4950.00 · Current $4950.00

General-duty citation text

29 CFR 1910.157(c)(4): The employer did not assure that portable fire extinguishers were maintained in a fully charged and operable condition and kept in their designated places at all times except during use:  a/  Inside of the Production Area, the portable fire extinguisher #42014 was missing its pin and pressure gauge.

Issued

2015-01-27 00:00:00

Abate by

2015-03-16 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(g)(2): The employer did not provide the education required in paragraph (g)(1) of this section upon initial employment and at least annually thereafter:  a/  Employees were not instructed upon initial employment or annually thereafter in how to effectively use a portable fire extinguisher.

Issued

2015-01-27 00:00:00

Abate by

2015-03-16 00:00:00

Penalty

Initial $9900.00 · Current $9900.00

General-duty citation text

29 CFR 1910.305(b)(1)(ii): Unused openings in cabinets, boxes, and fittings were not effectively closed:  a/  Inside of the Production Area, the circuit breaker panel box that supplies 270/440 volt electrical power to the Cincinnati Millicron Extruder Machine was missing a knockout.  DCO ENVIRONMENTAL & RECYCLING INC. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.305(b)(1)(ii), which was contained in OSHA inspection number 964274, citation number 1, item number 8a and was affirmed as a final order on 06/12/14, with respect to a workplace located at 1900 Lee Avenue, Jackson, Missouri 63755.