AUSTELL, GA —
OSHA Inspection: D&M MACHINE SHOP INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of D&M MACHINE SHOP INC. in 3300 HUMPHRIES HILL RD, AUSTELL, GA 30106 (NAICS 332710). OSHA activity number 340215185.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D&M MACHINE SHOP INC.
- Site address
- 3300 HUMPHRIES HILL RD
- City
- AUSTELL
- State
- GA
- ZIP
- 30106
- Mailing
- 3300 HUMPHRIES HILL RD, AUSTELL, GA 30106
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 5
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C01
- Issued
- May 1, 2015
- Abate by
- May 13, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. a) 3300 Humphries Hill Rd. Austell Ga. Machine Shop: Employees were exposed to amputation and shock hazards caused by performing maintenance work on machines without the employer establishing an energy control program. Maintenance was performed on machines such as but not limited to: 1) CNC machine 2) Lathes 3) Grob band Saw 4) DoAll Verticle Contour Machine
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.212 A01
- Issued
- May 1, 2015
- Abate by
- May 28, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc. a) 3300 Humphries Hill Rd. Austell Ga. Machine shop: Employees were exposed to cut hazards caused while using an unguarded Drill press with no nomenclature. b) 3300 Humphries Hill Rd. Austell Ga. Machine shop: Employees were exposed to cut hazards caused while using an unguarded Enco Drill press. c) 3300 Humphries Hill Rd. Austell Ga. Machine shop: Employees were exposed to cut hazards caused while using a Milling machine with no nomenclature.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.212 B
- Issued
- May 1, 2015
- Abate by
- May 13, 2015
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.212(b): Anchoring fixed machinery. Machines designed for a fixed location shall be securely anchored to prevent walking or moving. a) 3300 Humphries Hill Rd. Austell Ga. Machine shop: Employees were exposed to struck-by hazards from four bench grinders that are not fastened to keep them from moving or falling over.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.215 A02
- Issued
- May 1, 2015
- Abate by
- May 7, 2015
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Guard design. The safety guard shall cover the spindle end, nut, and flange projections. The safety guard shall be mounted so as to maintain proper alignment with the wheel, and the strength of the fastenings shall exceed the strength of the guard, except: a) 3300 Humphries Hill Rd. Austell Ga. Machine shop: Employees were exposed to struck-by and caught in hazards when using the Van Dorn Grinder without safety guards covering the spindle end, nut, and flange projections
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1910.178 L04 I
- Issued
- May 1, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(i): 29 CFR 1910.178(l)(4)(i): The powered industrial truck (PITs) operators were not trained and evaluated at least once every three years: a) 3300 Humphries Hill Rd. Austell Ga.: Employees were operating a Clark Lp forklift without certification or retraining by the company
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at D&M Machine Shop INC.
View D&M Machine Shop INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340215185.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.