Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SMITH & WESSON CORP.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of SMITH & WESSON CORP. in 2100 ROOSEVELT AV, SPRINGFIELD, MA 01104 (NAICS 332994). OSHA activity number 340215615.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Smith & Wesson Corp. — free Get an email when a new federal OSHA severe-injury report for Smith & Wesson Corp. is published. One employer, no account, unsubscribe in one click.
Site address
2100 ROOSEVELT AV
City
SPRINGFIELD
State
MA
ZIP
01104
Mailing
ATTN: EH & S DEPARTMENT 2100 ROOSEVELT AVENUE, SPRINGFIELD, MA 01104
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332994
Employees
1350
Ownership type
A

4 citations on file for this inspection.

1910.305 G02 III

Other-than-serious 1 instance 8 exposed
Issued
Feb 20, 2015
Penalty
Initial $2,550 · Current $2,550

Hazardous substances 8870

29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws:    In the break room of the Twist Screw Machine Department at 2100 Roosevelt Avenue Springfield, MA:  On or about January 29, 2015, the employer did not ensure that a flexible cord on a relocatable power tap was connected to the device so that tension would not be transmitted to joints.
Recent events (2)
  • — I (O) $2550
  • — Z (S) $2550

1910.1200 F06 II

Other-than-serious 1 instance 8 exposed
Issued
Feb 20, 2015
Penalty
Initial $1,913 · Current $0 Reduced
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical:    In the twist screw machine department at 2100 Roosevelt Avenue Springfield, MA: On or about January 29, 2015, the employer had labeled a tote container of Powerclean 954 with an incorrect reactivity rating which did not provide specific information to employees regarding the physical and health hazards of the cleaner.
Recent events (2)
  • — I (O) $0
  • — Z (S) $1913

1910.1200 H03 II

Other-than-serious 1 instance 3 exposed
Issued
Feb 20, 2015
Abate by
Apr 8, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(3)(ii): Employee training did not include the physical and health hazards of the chemicals in the work area:    In the twist screw machine section of the small parts department at 2100 Roosevelt Avenue Springfield, MA: On or about January 29, 2015, the employer did not ensure that employee training included the physical and health hazards of the specific chemicals in the work area.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.1200 H03 IV

Other-than-serious 1 instance 1 exposed
Issued
Feb 20, 2015
Abate by
Apr 8, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(3)(iv): Employee training did not include the details of the hazardous communication program developed by the employer, including an explanation of labels received on shipped containers and the work place labeling system used by their employer, and the safety data sheet, including the order of information and how the employees can obtain and use the appropriate hazard information:    In the twist screw machine section of the small parts cell at 2100 Roosevelt Avenue Springfield, MA: On or about January 29, 2015, the employer did not ensure that all employees working with hazardous materials were trained on the new requirements of the Global Harmonization System (GHS) including explanation of labels received on shipping containers and work place labeling system used by the employer, the safety data sheet and how employees can use the hazard information.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

View Smith & Wesson Corp.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340215615.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.