YORK, PA —
OSHA Inspection: SPECIALTY FABRICATORS INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SPECIALTY FABRICATORS INC. in 10 MARIANNE DRIVE SUITE 102, YORK, PA 17406 (NAICS 332322). OSHA activity number 340215938.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPECIALTY FABRICATORS INC.
- Site address
- 10 MARIANNE DRIVE SUITE 102
- City
- YORK
- State
- PA
- ZIP
- 17406
- Mailing
- 10 MARIANNE DRIVE SUITE 102, YORK, PA 17406
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 12
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Mar 25, 2015
- Abate by
- Apr 20, 2015
- Penalty
- Initial $1,200 · Current $900 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: instance a) and c) are deleted. a) Roto-Die Press Brake-Employees changing dies on the Roto-Die Press Brake were exposed to struck-by hazards from not having machine specific Lockout/Tagout procedures on machines with more than one source of energy, on or about January 29th, 2015. b) Piranha 175 Ton Press Brake-Employees changing dies on the Piranha 175 Ton Press Brake were exposed to struck-by hazards from not having machine specific Lockout/Tagout procedures on machines with more than one source of energy, on or about January 29th, 2015. c) Whitney 30 ton punch-Employees changing dies on the Whitney 30 ton punch were exposed to struck-by hazards from not having machine specific Lockout/Tagout procedures on machines with more than one source of energy, on or about January 29th, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $900
- — Z (S) $1200
1910.147 C06 I
- Issued
- Mar 25, 2015
- Abate by
- Apr 20, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) 10 Marianne Drive - The employer did not conduct a periodic inspection of the energy control procedures at least annually exposing employees to potentially hazardous energy when engaging in repair and maintenance activities, on or about January 29th, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Mar 25, 2015
- Abate by
- Apr 20, 2015
- Penalty
- Initial $2,800 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Roto-Die Press Brake-Employees bending on the Roto-Die press brake were exposed to amputation hazards. The employer did not provide guarding for the machine and did not establish a work rule to prohibit the employee from placing his fingers within four inches of the point of operation on or about January 29th, 2015. b) Piranha Press Brake-Employees bending on the Piranha press brake were exposed to amputation hazards. The employer did not provide guarding for the machine and did not establish a work rule to prohibit the employee from placing his fingers within four inches of the point of operation, on or about January 29th, 2015. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2100
- — Z (S) $2800
More inspections at Specialty Fabricators INC.
View Specialty Fabricators INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340215938.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.