SAINT JOHN, KS —
OSHA Inspection: ST JOHN WELDING & MANUFACTURING INC.
Unprogrammed Related inspection · Health discipline
At a glance
On , OSHA opened an unprogrammed Related health inspection of ST JOHN WELDING & MANUFACTURING INC. in 602 N. U.S. HWY. 281, SAINT JOHN, KS 67576 (NAICS 811310). OSHA activity number 340218577.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ST JOHN WELDING & MANUFACTURING INC.
- Site address
- 602 N. U.S. HWY. 281
- City
- SAINT JOHN
- State
- KS
- ZIP
- 67576
- Mailing
- 602 N. U.S. HWY. 281, SAINT JOHN, KS 67576
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811310
- Employees
- 5
- Ownership type
- A
Citations
4 citations on file for this inspection.
1903.19 D01
- Issued
- Jun 13, 2016
- Abate by
- Jul 29, 2016
- Penalty
- Initial $400 · Current $400
General-duty citation text
29 CFR 1903.19(d)(1): The employer must submit to the Agency, along with the information on abatement certification required by paragraph (c)(3) of this section, documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required. The employer did not provide the Occupational Safety and Health Administration certification and documentation of abatement as required for Citation #1, Item. 29 CFR 1903.19(d)(1) requires certification and documentation that the abatement of the above violation is complete.
Recent events (1)
- — Z (O) $400
1910.1200 E01
- Issued
- Mar 5, 2015
- Abate by
- May 29, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: Employees conducting welding operation and vehicle maintenance operations are exposed to chemical hazards such as but not limited to motor oils, oxygen and acetylene in that employer had not developed and implemented a comprehensive hazard communication program.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.132 D01
- Issued
- Mar 5, 2015
- Abate by
- May 29, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): Employees located in the shop area of facility are exposed to physical and respirable hazards such as but not limited to, grinding, sanding, welding fumes and respirable dust, in that a personal protective equipment assessment has not been conducted for each workstation.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.132 E
- Issued
- Mar 5, 2015
- Abate by
- Mar 31, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.132(e): Defective and damaged equipment. Defective or damaged personal protective equipment shall not be used. Employees are exposed to noise hazards during grinding and sanding operations in that the ear muffs provided by the employer are severely damaged.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
More inspections at ST John Welding & Manufacturing INC.
View ST John Welding & Manufacturing INC.'s full OSHA safety record →
More inspections in this industry (NAICS 811310)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340218577.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.