OSHA Inspection: NOEL REYES

Issued

Feb 6, 2015

Abate by

Feb 12, 2015

Penalty

Initial $2,000 · Current $2,000

General-duty citation text

29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames,  or uprights did not bear on base plates, mud sills or other adequate firm foundation:   The employer does not ensure that scaffold legs bear on base plates and mud sills.  This violation was observed on or about January 30, 2015, at the job site where an employee was exposed to a 13.5 foot fall hazard when working on an elevated pump jack scaffold without the scaffold legs bearing on base plates.     Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that all scaffold legs bear on base plates and mud sills.

Issued

Feb 6, 2015

Abate by

Feb 12, 2015

Penalty

Initial $2,800 · Current $2,800

General-duty citation text

29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level were not protected from falling to that lower level:   The employer does not protect employees from falling when working on scaffold more than 10 feet above a lower level.  This violation was observed on or about January 30, 2015, at the job site where an employee was exposed to a 13.5 foot fall hazard when working on an elevated pump jack scaffold without being protected from falling when working more than 10 feet above a lower level.     Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that all employees working from a scaffold 10 feet or more above a lower level are protected from falling.

Issued

Feb 6, 2015

Abate by

Feb 12, 2015

Penalty

Initial $2,000 · Current $2,000

General-duty citation text

29 CFR 1926.452(j)(1): 29 CFR 1926.452(j)(1):  Pump jack brackets, braces, and accessories were not fabricated from metal plates and angles. Each pump jack bracket did not have two positive gripping mechanisms to prevent any failure or slippage:   The employer does not ensure that all brackets and braces are fabricated from metal plates and angles.  This violation was observed on or about January 30, 2015, at the job site where an employee was exposed to a fall hazard when working on an elevated pump jack scaffold without the scaffold braces having been fabricated from metal plates and angles.     Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that all brackets and braces are fabricated from metal plates and angles.

Issued

Feb 6, 2015

Abate by

Feb 12, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.452(j)(2): Poles were not secured to the structure by rigid triangular bracing or equivalent at the bottom, top, and other points as necessary:   The employer does not secure the scaffold poles to the structure at the bottom, top, and other points as necessary.  This violation was observed on or about January 30, 2015, at the job site where an employee was exposed to a fall hazard when working on an elevated pump jack scaffold without the scaffold being secured at the bottom and other points as necessary.     Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure scaffold poles are secured to the structure by rigid triangular bracing at the bottom, top, and other points as necessary.