NORTH VERNON, IN —
OSHA Inspection: US DEPARTMENT OF AGRICULTURE, FOOD SAFETY AND INSPECTION SERVICE, NORTH VERNON, IN
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of US DEPARTMENT OF AGRICULTURE, FOOD SAFETY AND INSPECTION SERVICE, NORTH VERNON, IN in 4190 S. COUNTY ROAD 350 WEST, NORTH VERNON, IN 47265 (NAICS 926140). OSHA activity number 340262419.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Site address
- 4190 S. COUNTY ROAD 350 WEST
- City
- NORTH VERNON
- State
- IN
- ZIP
- 47265
- Mailing
- 4190 S. COUNTY ROAD 350 WEST, NORTH VERNON, IN 47265
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 926140
- Employees
- 26
- Ownership type
- D
Citations
4 citations on file for this inspection.
1910.303 B01
- Issued
- Feb 27, 2015
- Abate by
- Mar 11, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv): Flexible cords and cables being utilized as a substitute for fixed wiring of a permanent structure: a) On or about Tuesday, January 26, 2015, in the barn animal inspection area, there was a temporary, flexible cord being used as permanent wiring for lighting. Employees were exposed to potential electrical hazards.
Recent events (1)
- — Z (S) $0
1910.303 B02
- Issued
- Feb 27, 2015
- Abate by
- Mar 11, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling. a) On or about February 6, 2015, in the barn animal inspection area, there was a light switch improperly installed with temporary wiring. Employees were exposed to potential electrical hazards.
Recent events (1)
- — Z (S) $0
1910.303 B07 IV
- Issued
- Feb 27, 2015
- Abate by
- Mar 11, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(iv): There shall be no damaged parts that may adversely affect safe operation or mechanical strength of the equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating. a) On or about February 6, 2015 in the barn animal inspection area, the cover plate on a receptacle was broken. Employees were exposed to live parts which could result in potential electrical hazards.
Recent events (1)
- — Z (S) $0
1910.305 G02 III
- Issued
- Feb 27, 2015
- Abate by
- Mar 18, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws. On or about Tuesday, February 6, 2015, in the cutting room area, an electrical cord, hung from the ceiling and was being used in the operation of the slaughter line, had separated from the joint and bushing. Employees were exposed to potential electrical hazards.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 926140)
More inspections in IN
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340262419.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.