ABILENE, TX —
OSHA Inspection: AL'S CUSTOM CARPENTRY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AL'S CUSTOM CARPENTRY in HACIEND RANCH/116 TIERRA CT, ABILENE, TX 79602 (NAICS 238130). OSHA activity number 340263706.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AL'S CUSTOM CARPENTRY
- Site address
- HACIEND RANCH/116 TIERRA CT
- City
- ABILENE
- State
- TX
- ZIP
- 79602
- Mailing
- 1942 BOGEL AVE, ABILENE, TX 79603
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 5
- Ownership type
- A
Citations
8 citations on file for this inspection.
1926.100 A
- Issued
- Apr 10, 2015
- Abate by
- May 6, 2015
- Penalty
- Initial $1,200 · Current $700 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets. On or about February 4, 2015, employees were exposed to struck by hazards in that the employer failed to have and ensure the use of head protection by employees.
Recent events (2)
- — I (S) $700
- — Z (S) $1200
1926.405 G02 IV
- Issued
- Apr 10, 2015
- Abate by
- May 6, 2015
- Penalty
- Initial $1,200 · Current $700 Reduced
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws. On or about February 4, 2015, employees were exposed to electrical hazards in that the employer failed to ensure that the strain relief on the compressor electrical box was free from electrical hazards.
Recent events (2)
- — I (S) $700
- — Z (S) $1200
1926.451 A06
- Issued
- Apr 10, 2015
- Abate by
- May 6, 2015
- Penalty
- Initial $1,600 · Current $900 Reduced
General-duty citation text
29 CFR 1926.451(a)(6): Scaffolds were not constructed in accordance with the design by a qualified person. On or about February 4,2015, employees were exposed to fall and caught in hazards in that the competent person failed to ensure that the scaffold was constructed in accordance with design standards.
Recent events (2)
- — I (S) $900
- — Z (S) $1600
1926.451 B01
- Issued
- Apr 10, 2015
- Abate by
- May 6, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(b)(1): Platform(s) on all working levels of scaffolds, were not fully planked or decked between the front uprights and guardrail supports such that the space between adjacent units, and the space between the platform and the uprights. On or about February 4, 2015, employees were exposed to fall and caught in hazards in that the employer failed to ensure that the scaffold was fully planked.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 C03
- Issued
- Apr 10, 2015
- Abate by
- May 6, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(3): Supported scaffold poles, legs, post, frames, and/or uprights were not plumb and braced to prevent swaying and displacement. On or about February 4, 2015, employees were exposed to fall and caught in hazards in that the employer failed to ensure the scaffold was plumb and level.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.452 C02
- Issued
- Apr 10, 2015
- Abate by
- May 6, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.452(c)(2): Tubular welded frames and panels were not braced by cross, horizontal, or diagonal braces, or combination thereof, which would have secured vertical members together laterally. On or about February 04, 2015, employees were exposed to caught in and fall hazards in that the employer failed to ensure the use of cross bracing to keep the scaffold intact.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 C02
- Issued
- Apr 10, 2015
- Abate by
- May 6, 2015
- Penalty
- Initial $1,200 · Current $700 Reduced
General-duty citation text
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames, or uprights did not bear on base plates, mud sills or other adequate firm foundation. On or about February 4, 2015, employees were exposed to fall and caught in hazards in that the employer failed to ensure the use of mud sills on the scaffold.
Recent events (2)
- — I (S) $700
- — Z (S) $1200
1926.501 B13
- Issued
- Apr 10, 2015
- Abate by
- May 6, 2015
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): On or about February 04, 2015, employees were exposed to fall hazards in excess of six feet while performing residential construction.
Recent events (2)
- — I (S) $0
- — Z (S) $2800
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340263706.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.