OSHA Inspection: N.C. CONSTRUCTION LLC.

Issued

Jun 8, 2015

Abate by

Jul 24, 2015

Penalty

Initial $440 · Current $440

General-duty citation text

29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.   a.  The employer has failed to submit abatement certification within ten days of the abatement date, April 6, 2015, for a violation of 29 CFR 1926.503(a)(1), issued as citation 1, item 2, and described as follows:  Located at 1668 Buckeye Place in Grove City, Ohio, employees were performing framing work on a four story hotel. Employees were not trained on how to properly use fall protection and the hazards associated with fall hazards while framing. Employees were working at heights of approximately 36 feet and not utilizing fall protection.

Issued

Jun 8, 2015

Abate by

Jul 24, 2015

Penalty

Initial $440 · Current $440

General-duty citation text

29 CFR 1903.19(d)(1): The employer must submit to the Agency, along with the information on abatement certification required by paragraph (c)(3) of this section, documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  a.  The employer has failed to submit abatement certification and documentation within ten days of the abatement date, April 6, 2015, for a violation of 29 CFR 1926.501(b)(1), issued as citation 1, item 1, and described as follows: Located at 1668 Buckeye Place in Grove City, Ohio, employees were performing framing work at the edge of the fourth floor without the use of fall protection, exposing employees to a fall of approximately 36 feet.

Issued

Mar 25, 2015

Abate by

Apr 6, 2015

Penalty

Initial $3,080 · Current $3,080

General-duty citation text

29 CFR 1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.  a. Located at 1668 Buckeye Place in Grove City, Ohio, employees were performing framing work at the edge of the fourth floor without the use of fall protection, exposing employees to a fall of approximately 36 feet.

Issued

Mar 25, 2015

Abate by

Apr 6, 2015

Penalty

Initial $2,200 · Current $2,200

General-duty citation text

29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.  a. Located at 1668 Buckeye Place in Grove City, Ohio, employees were performing framing work on a four story hotel. Employees were not trained on how to properly use fall protection and the hazards associated with fall hazards while framing. Employees were working at heights of approximately 36 feet and not utilizing fall protection.