CHICKASHA, OK —
OSHA Inspection: GERALD'S WELDING & FABRICATION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GERALD'S WELDING & FABRICATION, INC. in 150 QUAIL ROAD, CHICKASHA, OK 73023 (NAICS 332710). OSHA activity number 340343474.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GERALD'S WELDING & FABRICATION, INC.
- Site address
- 150 QUAIL ROAD
- City
- CHICKASHA
- State
- OK
- ZIP
- 73023
- Mailing
- P.O. BOX 249, CHICKASHA, OK 73023
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 30
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.303 G02 I
- Issued
- Jun 24, 2015
- Abate by
- Jul 10, 2015
- Penalty
- Initial $1,575 · Current $945 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): On or about February 3, 2015, and at times prior thereto, the employer allowed the employees to continue to use the iron worker with the broken/missing "off" control button. Employee was exposed to the hazard of electrical shock.
Recent events (2)
- — I (S) $945
- — Z (S) $1575
1910.303 G02 II
- Issued
- Jun 24, 2015
- Abate by
- Jul 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(2)(ii): In locations where electric equipment was likely to be exposed to physical damage, enclosures or guards were not so arranged and of such strength as to prevent such damage: On or about February 3, 2015, and at times prior thereto, the employer allowed the employees to continue to use the iron worker with the broken/missing "off" control button. Employee was exposed to the hazard of electrical shock.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B01 I
- Issued
- Jun 24, 2015
- Abate by
- Jul 5, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: On or about February 3, 2015, and at times prior thereto, the employer allowed employees to continue operating an iron worker on which the electrical cord was pulled out of the control box, exposing the inner conductors, which were then subject to abrasion. The employees were exposed to electrical shock.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 A02 II
- Issued
- Jun 24, 2015
- Abate by
- Jul 2, 2015
- Penalty
- Initial $1,575 · Current $945 Reduced
General-duty citation text
29 CFR 1910.305(a)(2)(ii): Temporary wiring was not removed immediately upon completion of the project or purpose for which the wiring was installed: On or about February 3, 2015, and at times prior thereto, the employer continued to use temporary wiring after remodeling of the building was done. employees were exposed to the hazard of electrical shock.
Recent events (2)
- — I (S) $945
- — Z (S) $1575
More inspections at Gerald'S Welding & Fabrication, INC.
View Gerald'S Welding & Fabrication, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340343474.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.