Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DIAMOND FURNITURE SERVICES INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DIAMOND FURNITURE SERVICES INC. in 544 PARK AVENUE, BROOKLYN, NY 11205 (NAICS 811420). OSHA activity number 340345586.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Diamond Furniture Services INC. — free Get an email when a new federal OSHA severe-injury report for Diamond Furniture Services INC. is published. One employer, no account, unsubscribe in one click.
Site address
544 PARK AVENUE
City
BROOKLYN
State
NY
ZIP
11205
Mailing
544 PARK AVENUE, BROOKLYN, NY 11205
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811420
Employees
25
Ownership type
A

5 citations on file for this inspection.

1910.37 A03

Serious Gravity 10 1 instance 6 exposed
Issued
Jul 6, 2015
Penalty
Initial $4,900 · Current $4,900
29 CFR 1910.37(a)(3): Exit routes were not free and/or unobstructed. No materials or equipment may be placed, either permanently or temporarily.  Site: 544 Park Avenue Brooklyn, NY  On or about 2/10/15  a) The emergency exit in the Re-upholstery area was blocked by debris, garbage, bags and a desk.
Recent events (1)
  • — Z (S) $4900

1910.212 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Jul 6, 2015
Abate by
Jul 16, 2015
Penalty
Initial $4,900 · Current $4,900
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazards created by in-going nip points, rotating parts, and/or flying chips and sparks.  Site: 544 Park Avenue Brooklyn, NY  On or about 2/10/15  a)The Dewalt  Powermatic saw used by  employees was not provided with a guard.
Recent events (1)
  • — Z (S) $4900

1910.303 G02 I

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 6, 2015
Abate by
Jul 16, 2015
Penalty
Initial $2,100 · Current $2,100
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating  at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures.   Site: 544 Park Avenue Brooklyn, NY  On or about 2/10/15  a) Panelboard in the Finish and spray booth area was not provided with a cover. Employees exposed to arc while working/walking by enclosure.
Recent events (1)
  • — Z (S) $2100

1910.305 B02 I

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 6, 2015
Abate by
Jul 16, 2015
Penalty
Initial $4,200 · Current $4,200
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose; and each outlet box in completed installations did not have a cover, face plate or fixture canopy.  Site: 544 Park Avenue Brooklyn, NY  On or about 2/10/15  a) Employee was exposed to electrical shock due to exposed live electricity. The light switch by the entrance of the spry booth was missing the face plate.
Recent events (1)
  • — Z (S) $4200

1910.305 G01 IV A

Serious Gravity 1 1 instance 6 exposed
Issued
Jul 6, 2015
Abate by
Jul 16, 2015
Penalty
Initial $2,100 · Current $2,100
29 CFR 1910.305(g)(1)(iv)(A): 29 CFR 1910.305(g)(1)(iv)A: Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used as a substitute for permanent building wiring.  Site: 544 Park Avenue Brooklyn, NY  On or about 2/10/15  a) Extension Cords throughout the establishment were used in place of permanent wiring. Extension cords used to energize lights throughout facility.
Recent events (1)
  • — Z (S) $2100

View Diamond Furniture Services INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340345586.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.