EDEN, WI —
OSHA Inspection: D&G PRECISION MANUFACTURING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of D&G PRECISION MANUFACTURING, INC. in 107 JENNIFER LANE, EDEN, WI 53019 (NAICS 332710). OSHA activity number 340372507.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D&G PRECISION MANUFACTURING, INC.
- Site address
- 107 JENNIFER LANE
- City
- EDEN
- State
- WI
- ZIP
- 53019
- Mailing
- 107 JENNIFER LANE, EDEN, WI 53019
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 26
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A03 II
- Issued
- Apr 20, 2015
- Abate by
- Jun 9, 2015
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) On or about 2/11/15, control keys were left in the operating panels of CNC Milling and lathing machines allowing the machines to be run with the safety features disabled, exposing employees to the point of operation during the operating cycle. (b) On or about 2/11/15, interlocks on the OKUMA MX-45 VAE vertical mill were not functioning, allowing the machine to be operated with the door open and exposing employees to the point of operation during the operating cycle.
Recent events (2)
- — I (S) $2100
- — Z (S) $3500
1910.303 B02
- Issued
- Apr 20, 2015
- Abate by
- Jun 9, 2015
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: Metallic outlet boxes (handy boxes) were not installed in accordance with the UL identifier QCIT which states the boxes shall be mounted in or on a surface. The handy boxes were attached to drop down flexible cords and suspended in the air.
Recent events (2)
- — I (S) $2100
- — Z (S) $3500
1910.305 B02
- Issued
- Apr 20, 2015
- Abate by
- May 4, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: Three junction boxes in the grinding room were not provided with covers.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G01 IV A
- Issued
- Apr 20, 2015
- Abate by
- Jun 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: (a) Extension cords and power taps were used as a substitute for fixed wiring to power lights, fans, and communication equipment for CNC Operated machines.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L04 III
- Issued
- Apr 20, 2015
- Abate by
- May 11, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: Forklift operators were not being evaluated every three years.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332710)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340372507.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.