PEARL, MS —
OSHA Inspection: STEVENS SHEETMETAL & IRONWORKS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of STEVENS SHEETMETAL & IRONWORKS, INC. in 420 CHILDRE ROAD, PEARL, MS 39208 (NAICS 332322). OSHA activity number 340405182.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STEVENS SHEETMETAL & IRONWORKS, INC.
- Site address
- 420 CHILDRE ROAD
- City
- PEARL
- State
- MS
- ZIP
- 39208
- Mailing
- P.O. BOX 6176, JACKSON, MS 39208
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 12
- Ownership type
- A
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 18, 2015
- Abate by
- Jul 13, 2015
- Penalty
- Initial $2,000 · Current $1,100 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): Public Law 91-596, the Occupational Safety and Health Act of 1970, Section 5(a)(1): The employer did not furnish to each of his employees employment and a place of employment which were free from recognized hazards that were causing or are likely to cause death or serious physical harm to his employees, in that employees were exposed to crushing and or struck by hazard form forklift tip over. (a) Jobsite - On or about February 11, 2015, the employees were using a TCM forklift that was not equipped with a seatbelt.
Recent events (2)
- — I (S) $1100
- — Z (S) $2000
1910.147 C04 II
- Issued
- Jun 18, 2015
- Abate by
- Oct 1, 2015
- Penalty
- Initial $2,000 · Current $1,100 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to items (a) through (d) of this section: (a) Facility - On or about February 11, 2015, the employer's written energy control program was deficient in that it did not specifically outline the procedural steps for controlling hazardous energy.
Recent events (2)
- — I (S) $1100
- — Z (S) $2000
1910.147 C06 I
- Issued
- Jun 18, 2015
- Abate by
- Oct 1, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed. (a) Jobsite - On or about February 11, 2015, the employer had not conducted an annual review of the energy control procedures.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 IV
- Issued
- Jun 18, 2015
- Abate by
- Oct 1, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer shall certify that employee training has been accomplished and is being kept up to date. The certification shall contain each employee's name and dates of training. (a) Facility - On or about February 11, 2015, the employer did not have documentation to certify that employee training was accomplished and kept up to date. -
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L04 III
- Issued
- Jun 18, 2015
- Abate by
- Oct 1, 2015
- Penalty
- Initial $2,000 · Current $1,100 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance had not been conducted at least once every 3 years. (a) Jobsite - On or about February 11, 2015, the employer had not provided forklift training within the past 3 years to employees required to operate forklifts.
Recent events (2)
- — I (S) $1100
- — Z (S) $2000
1910.179 J03
- Issued
- Jun 18, 2015
- Abate by
- Oct 1, 2015
- Penalty
- Initial $1,800 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.179(j)(3): Complete periodic inspections of the crane were not performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section: (a) Jobsite - On or about February 11, 2015, employees were using overhead cranes and the cranes were not being inspected periodically as required.
Recent events (2)
- — I (S) $1000
- — Z (S) $1800
1910.132 D02
- Issued
- Jun 18, 2015
- Abate by
- Oct 1, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not have a written certification of hazard assessment identifying the workplace evaluated; the person certifying that the evaluation has been performed; and the date(s) of the hazard assessment: (a) Facility - On or about February 11, 2015, the employer did not have documentation to certify a hazard assessment had been conducted.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Stevens Sheetmetal & Ironworks, INC.
View Stevens Sheetmetal & Ironworks, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340405182.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.