Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: THE AMERICAN BOTTLING COMPANY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of THE AMERICAN BOTTLING COMPANY in 4518 SEGUIN RD, SAN ANTONIO, TX 78219 (NAICS 312111). OSHA activity number 340411107.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch The American Bottling Company — free Get an email when a new federal OSHA severe-injury report for The American Bottling Company is published. One employer, no account, unsubscribe in one click.
Site address
4518 SEGUIN RD
City
SAN ANTONIO
State
TX
ZIP
78219
Mailing
4518 SEGUIN RD, SAN ANTONIO, TX 78219
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
312111
Employees
268
Ownership type
A

4 citations on file for this inspection.

1910.24 H

Other-than-serious 1 instance 3 exposed
Issued
Jun 2, 2015
Abate by
Jun 10, 2015
Penalty
Initial $3,000 · Current $1,800 Reduced
29 CFR 1910.24(h): Standard railings were not provided on the open sides of all exposed stairways and stair platforms:    On or about February 19, 2015, and at times prior thereto, within the mixing batch room employees are exposed to hazards of falls up to approximately 5' 8" to the ground level from a fixed metal stair platform without a midrail.
Recent events (2)
  • — I (O) $1800
  • — Z (S) $3000

1910.219 C01 I

Serious Gravity 5 3 instances 3 exposed
Issued
Jun 2, 2015
Abate by
Jun 10, 2015
Penalty
Initial $5,000 · Current $3,000 Reduced
29 CFR 1910.219(c)(1)(i): Each continuous line of shafting was not secured in position against excessive endwise movement:  On or about February 19, 2015, and at times prior thereto, employee were exposed to the hazards of a caught-in from unguarded rotary shaft on water pumps located within the following locations:  a) Along the west side of the production floor, line #1 filler machine has a water pump at foot/ankle level approximately 6" above the floor without a protective guard over the metal rotating shaft.  b) Along the south side of the production facility, within the water treatment section, along the south end of the water line system a water pump at foot/ankle level approximately 6" above the floor without a protective guard over the metal rotating shaft.  c) Along the south side of the production facility, within the water treatment section, along the north end of the water line system a water pump at foot/ankle level approximately 6" above the floor without a protective guard over the metal rotating shaft.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5000

1910.219 C04 II

Other-than-serious 1 instance 2 exposed
Issued
Jun 2, 2015
Abate by
Jun 10, 2015
Penalty
Initial $5,000 · Current $3,000 Reduced
29 CFR 1910.219(c)(4)(ii): The unused keyway(s) of projecting shaft end(s) were not filled up or covered:    On or about February 19, 2015, and at times prior thereto; employees are exposed to the hazards caught by an unprotected rotating metal keyway while working along the #1 filler line machine.
Recent events (2)
  • — I (O) $3000
  • — Z (S) $5000

1910.305 B01 II

Serious Gravity 5 2 instances 2 exposed
Issued
Jun 2, 2015
Abate by
Jun 10, 2015
Penalty
Initial $5,000 · Current $3,000 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:  Along the production floor area, on or about February 19, 2015, and at times prior thereto, employees were exposed to electrical shock hazards of 120 volts from unused openings along the bottom and sides of 2 electrical distribution panel boxes with no serial numbers identification that were not effectively closed.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $5000

View The American Bottling Company's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340411107.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.