BROOKHAVEN, MS —
OSHA Inspection: B & O WELDING & MACHINE COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of B & O WELDING & MACHINE COMPANY, INC. in 1380 HIGHWAY 51 N.E., BROOKHAVEN, MS 39601 (NAICS 332710). OSHA activity number 340416163.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- B & O WELDING & MACHINE COMPANY, INC.
- Site address
- 1380 HIGHWAY 51 N.E.
- City
- BROOKHAVEN
- State
- MS
- ZIP
- 39601
- Mailing
- 1380 HIGHWAY 51 N.E., BROOKHAVEN, MS 39601
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 14
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 II
- Issued
- Apr 6, 2015
- Abate by
- Apr 28, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to items (a) through (d) of this section: (a) Jobsite - On or about February 19, 2015 the employer's energy control program did not include specific procedural steps for controlling hazardous energy.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.147 C06 I
- Issued
- Apr 6, 2015
- Abate by
- Apr 28, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed. (a) Jobsite - On or about February 19, 2015 the employer had not conducted an annual review of the energy control procedures.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 IV
- Issued
- Apr 6, 2015
- Abate by
- Apr 28, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer shall certify that employee training has been accomplished and is being kept up to date. The certification shall contain each employee's name and dates of training. (a) Facility - On or about February 19, 2015, the employer did not have documentation to certify that employee training was accomplished and kept up to date.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L04 III
- Issued
- Apr 6, 2015
- Abate by
- Apr 28, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance had not been conducted at least once every 3 years. (a) Jobsite - On or about February 19, 2015, the employer had not provided forklift training within the past 3 years to employees required to operate forklifts.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.1200 H01
- Issued
- Apr 6, 2015
- Abate by
- Apr 28, 2015
- Penalty
- Initial $1,600 · Current $780 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided information and training on hazardous chemicals or materials in their work area at the time of their initial assignment and whenever a new hazard was introduced into their work area: (a) Facility - On or about February 19, 2015, the employer had not provided employee training on the revised Hazard Communication Standard.
Recent events (2)
- — I (S) $780
- — Z (S) $1600
1904.32 A04
- Issued
- Apr 6, 2015
- Abate by
- Apr 28, 2015
- Penalty
- Initial $340 · Current $0 Reduced
General-duty citation text
29 CFR 1904.32(a)(4): Post the annual summary. (a) Facility - On or about February 19, 2015, the OSHA 300A form or equivalent annual summary was not posted as required.
Recent events (2)
- — I (O) $0
- — Z (O) $340
1910.132 D02
- Issued
- Apr 6, 2015
- Abate by
- Apr 28, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment had been performed through a written certification that identified the workplace evaluated; the person certiftying that the evaluation has been performed; the date(s) of the hazard assessment; and which identifies the document as a certification of hazard assessment: (a) Jobsite - On or about February 19, 2015, employees were performing machining related work tasks. The employer did not have documentation to certify a personal protective equipment hazard assessment has been conducted.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332710)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340416163.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.