OWASSO, OK —
OSHA Inspection: S & A FRAMING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of S & A FRAMING, INC. in 14625 E 11TH COURT NORTH, OWASSO, OK 74055 (NAICS 238130). OSHA activity number 340419837.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- S & A FRAMING, INC.
- Site address
- 14625 E 11TH COURT NORTH
- City
- OWASSO
- State
- OK
- ZIP
- 74055
- Mailing
- 12804 E 37TH PLACE, TULSA, OK 74146
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.416 E01
- Issued
- Aug 6, 2015
- Abate by
- Aug 10, 2015
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: On or about February 12, 2015, a flexible cord was used to power a circular saw that was damaged through the insulation to the wiring. Employees were exposed to the hazard of electrical shock.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1926.451 A06
- Issued
- Aug 6, 2015
- Abate by
- Aug 10, 2015
- Penalty
- Initial $2,800 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.451(a)(6): Scaffolds were not constructed in accordance with the design by a qualified person: On or about February 12, 2015, an employee worked from a job made scaffold that was not constructed in accordance with the design by a qualified person. The scaffold design lacked the required capacity ratings, safety factors and stability assurance, exposing the employee to the hazard of falls.
Recent events (2)
- — I (S) $1200
- — Z (S) $2800
1926.451 B02
- Issued
- Aug 6, 2015
- Abate by
- Aug 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide: On or about February 12, 2015, employee worked from job made scaffold platform that was not at least 18 inches wide. Employee was exposed to the hazard of falls.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 E01
- Issued
- Aug 6, 2015
- Abate by
- Aug 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used. On or about February 12, 2015, Employee working from job made scaffold that was greater than 2 feet above point of access was not provided a ladder or alternative measure for access and egress on the scaffold. Employee was exposed to the hazard of falls.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.501 B13
- Issued
- Aug 6, 2015
- Abate by
- Aug 10, 2015
- Penalty
- Initial $14,000 · Current $7,000 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): On or about February 12, 2015, an employee engaged in decking activities at heights greater than 6 feet was not protected by guardrail systems, safety net system or personal fall arrest system, exposing the employee to the hazard of falls. S & A Framing, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 894407, citation number 1, item number 1 and was affirmed as a final order on June 24, 2013, with respect to a workplace located at 10542 N 121st E. Ave., Owasso, OK 74055. S & A Framing, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 894430, citation number 1, item number 1 and was affirmed as a final order on August 9, 2013, with respect to a workplace located at 11902 E. 105th Place, Owasso, OK 74055.
Recent events (2)
- — I (R) $7000
- — Z (R) $14000
More inspections at S & a Framing, INC.
View S & a Framing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340419837.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.