SAN ANTONIO, TX —
OSHA Inspection: CAPITAL HARDWOODS & MILLWORKS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CAPITAL HARDWOODS & MILLWORKS in 15421 CAPITAL PORT DRIVE, SAN ANTONIO, TX 78249 (NAICS 321911). OSHA activity number 340422575.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CAPITAL HARDWOODS & MILLWORKS
- Site address
- 15421 CAPITAL PORT DRIVE
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78249
- Mailing
- 15421 CAPITAL PORT DRIVE, SAN ANTONIO, TX 78249
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 14
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 D04 I
- Issued
- Apr 1, 2015
- Abate by
- Apr 11, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: (a) West side of shop area: On or about, February 25, 2015, and at times prior thereto, employees are exposed to caught-in amputation hazards while changing the cutting head on a Weinig four sided moulding machine (Model: Powermat 500, Serial: 114079) while not having affixed a lock out tag out device on the main switch. (b) Center of shop area: On or about, February 25, 2015, and at times prior thereto, employees are exposed to caught-in amputation hazards while changing the saw blades on a Mereen-Johnson gang grip machine (Model: 312-DC/SR2 Serial: MJ-7517) while not having affixed a lock out tag out device on the main switch.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.212 B
- Issued
- Apr 1, 2015
- Abate by
- Apr 11, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: East side of Door Department: On or about, 24 February 2015, and at times prior thereto, employees were exposed to a struck-by and or caught-in hazards while using a Rikon drill press (Model: 30-230 Serial: 04327Q0176) that was not anchored and/or secured to the floor when drilling out door plugs from wood stock using a hole saw bit.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.212 A03 II
- Issued
- Apr 1, 2015
- Abate by
- Apr 11, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): East side of Door Department: On or about, 24 February 2015, and at times prior thereto, employees were exposed to a struck-by and/or Caught-in hazards from a Rikon drill press (Model: 30-230 Serial: 04327Q0176) that was unguarded while drilling out door plugs from wood stock with a hole saw bit.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.213 M01
- Issued
- Apr 1, 2015
- Abate by
- Apr 11, 2015
- Penalty
- Initial $2,400 · Current $1,440 Reduced
General-duty citation text
29 CFR 1910.213(m)(1): Cutting heads of wood shaper(s) were not enclosed with a cage or adjustable guard so designed so as to keep the operator's hand away from the cutting edge: (a) West side of shop area: On or about, 24 February 2015, employees were exposed to a amputation hazard while using a Sicar Shaper (Model: SF 1000 Serial: G4000001) to make patterned cuts into wood trim pieces and not having an adjustable guard installed. (b) West side of shop area: On or about, 24 February 2015, employees were exposed to a amputation hazard while using a Extrema Shaper (Model: ET-100/3 Serial: 704070035) to make patterned cuts into wood trim pieces and not having an adjustable guard installed. (c) West side of shop area: On or about, 24 February 2015, employees were exposed to a amputation hazard while using a Extrema Shaper (Model: ET-100/3 Serial: 704076014) to make patterned cuts into wood trim pieces and not having an adjustable guard installed.
Recent events (2)
- — I (S) $1440
- — Z (S) $2400
1910.242 B
- Issued
- Apr 1, 2015
- Abate by
- Apr 11, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: South side of wood trim area: On or about February 24, 2015, and at times prior thereto, an employee was exposed to a struck-by and/or embolism hazard while using a blow off tool attached to compressed air that was not reduced to less than 30 P.S.I. to clean off a machine.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
More inspections at Capital Hardwoods & Millworks
View Capital Hardwoods & Millworks's full OSHA safety record →
More inspections in this industry (NAICS 321911)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340422575.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.