WEST WARWICK, RI —
OSHA Inspection: MARTIN WOODWORKS INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of MARTIN WOODWORKS INC. in 3 BRIDAL AVENUE, WEST WARWICK, RI 02893 (NAICS 337110). OSHA activity number 340430891.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARTIN WOODWORKS INC.
- Site address
- 3 BRIDAL AVENUE
- City
- WEST WARWICK
- State
- RI
- ZIP
- 02893
- Mailing
- 3 BRIDAL AVENUE, WEST WARWICK, RI 02893
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 5
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.36 B01
- Issued
- Mar 23, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.36(b)(1): At least two exits routes were not available to permit prompt evacuation of employees during an emergency: a. Wood working and paint shop: On or about 2/27/15 there were not two exit routes available to employees during emergencies.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.213 C01
- Issued
- Mar 23, 2015
- Abate by
- Apr 9, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular hand fed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Wood Shop: On or about 2/27/15 the employer did not ensure that the hand-fed Powermatic III T-66 circular table saws used for rip cutting were guarded by an appropriate hood.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.213 C02
- Issued
- Mar 23, 2015
- Abate by
- Apr 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) Wood Shop: On or about 2/27/15 the employer did not ensure that the hand-fed Powermatic III T-66 circular table saws used for rip cutting were provided with spreaders.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Mar 23, 2015
- Abate by
- Apr 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) Wood Shop: On or about 2/27/15 the employer did not ensure that the hand-fed Powermatic III T-66 circular table saws used for rip cutting were provided with non-kickback devices.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 D01
- Issued
- Mar 23, 2015
- Abate by
- Apr 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Wood Shop: On or about 2/27/15 the employer did not ensure that the hand-fed Chang Iron Works CM-1300 circular table saw used for cross cutting was guarded by an appropriate hood.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 M01
- Issued
- Mar 23, 2015
- Abate by
- Apr 9, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.213(m)(1): Cutting heads of wood shaper(s) were not enclosed with a cage or adjustable guard so designed so as to keep the operator's hand away from the cutting edge: a) Wood Shop: On or about 2/27/15 the employer did not ensure that the Jet JWS 34L hand-fed wood shapers were guarded with an appropriate guard.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.1200 E01
- Issued
- Mar 23, 2015
- Abate by
- Jun 23, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a. Wood working and paint shop: On or about 2/27/15 the employer had not developed a hazard communication program before having employees work with hazardous chemicals including WoodSong II Stain Base and Pre-Stain.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.1200 G08
- Issued
- Mar 23, 2015
- Abate by
- Jun 23, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required safety data sheets for each hazardous chemical in the workplace: a. Wood working and paint shop: On or about 2/27/15 the employer did not maintain copies of safety data sheets for hazardous chemicals used in the workplace, including lacquer thinner.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1052 D01 I
- Issued
- Mar 23, 2015
- Abate by
- Apr 24, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1052(d)(1)(i): Where methylene chloride was present in the workplace, the employer did not determine each employee's exposure: a. Paint shop: On or about 2/27/15 the employer had not evaluated employee exposure to methylene chloride from the spray adhesive "Formica 268 NF" before allowing employees to work with this adhesive.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Martin Woodworks INC.
View Martin Woodworks INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340430891.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.