Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

SPRINGFIELD, MO —

OSHA Inspection: EXECUTIVE COACH BUILDERS

Complaint inspection · Health discipline

At a glance

On , OSHA opened a complaint health inspection of EXECUTIVE COACH BUILDERS in 4400 W. PRODUCTION ST., SPRINGFIELD, MO 65803 (NAICS 336211). OSHA activity number 340434190.

Watch Executive Coach Builders — free Get an email when a new federal OSHA severe-injury report for Executive Coach Builders is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment
EXECUTIVE COACH BUILDERS
Site address
4400 W. PRODUCTION ST.
City
SPRINGFIELD
State
MO
ZIP
65803
Mailing
4400 W. PRODUCTION ST., SPRINGFIELD, MO 65803

What kind of inspection was it?

Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B

When did the case open and close?

Opened
Case closed
Last modified
Data loaded

Establishment context

NAICS code
336211
Employees
14
Ownership type
A

Citations

5 citations on file for this inspection.

1910.101 A

Deleted Serious Gravity 5 2 instances 7 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.101(a): The employer did not determine that compressed gas cylinders under his control were in a safe condition to the extent that can be determined by visual or other inspections:  (a) At Executive Coach on or about March 26, 2015 a Millermatic arc welder Model 200 had a set of valves attached to a compressed gas cylinder used for MIG welding that was damaged and the welder had not been removed from service or the gauge repaired or replaced.  (b) At Executive Coach on or about March 26, 2015 a Millermatic arc welder Model 251 had a set of valves attached to a compressed gas cylinder used for MIG welding that was damaged and the welder had not been removed from service or the gauge repaired or replaced.   Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.  NOTE:  IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM.  FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2000

1910.254 D09 I

Deleted Serious Gravity 5 2 instances 7 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.254(d)(9)(i): The operator of welding equipment with a defect or safety hazard, did not have the use of the equipment discontinued until its safety had been assured:  (a) At Executive Coach on or about March 26, 2015 a Millermatic arc welder Model 200 had a set of valves attached to a compressed gas cylinder used for MIG welding that was damaged and the welder had not been removed from service or the gauge repaired by a skilled mechanic.  (b) At Executive Coach on or about March 26, 2015 a Millermatic arc welder Model 251 had a set of valves attached to a compressed gas cylinder used for MIG welding that was damaged and the welder had not been removed from service or the gauge repaired by a skilled mechanic.   Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.  NOTE:  IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM.  FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.107 C02

Serious Gravity 5 1 instance 7 exposed
Issued
Penalty
Initial $2000.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.107(c)(2): 29 CFR 1910.107(c)(2):  Open flame or spark producing equipment was within a spraying area and/or within 20 feet thereof, was not separated by a partition:    (a) At Executive Coach on or about February 25, 2015 an employee was spray painting with a flammable aerosol and had an electric heater located less than 10 feet away.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1910.107 C03

Serious Gravity 5 1 instance 7 exposed
Issued
Penalty
Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.107(c)(3): Space-heating appliances, steampipes, or hot surfaces were located in a spraying area where deposits of cumbustable residues may readily accumulate:  (a) At Executive Coach on or about February 25, 2015 an employee was spray painting with a flammable aerosol and had an electric heater located less than 10 feet away.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.252 B02 III

Serious Gravity 5 1 instance 14 exposed
Issued
Abate by
Penalty
Initial $2400.00 · Current $1200.00 Reduced

General-duty citation text

29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:    (a)  At Executive Coach Builders on or about February 25, 2015 workers were exposed to welding rays and were not protected by noncombustible or flameproof screens or shields.      Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.  NOTE:  IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM.  FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2400

More inspections at EXECUTIVE COACH BUILDERS

View EXECUTIVE COACH BUILDERS's full OSHA safety record →

More inspections in this industry (NAICS 336211)

More inspections in MO

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340434190.