SANFORD, FL —
OSHA Inspection: MBF INDUSTRIES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MBF INDUSTRIES, INC. in 210 TECH DR., SANFORD, FL 32771 (NAICS 336211). OSHA activity number 340441534.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MBF INDUSTRIES, INC.
- Site address
- 210 TECH DR.
- City
- SANFORD
- State
- FL
- ZIP
- 32771
- Mailing
- 210 TECH DR., SANFORD, FL 32771
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336211
- Employees
- 40
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 1, 2015
- Abate by
- Apr 20, 2015
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees a) On or about 02/26/2015 at the company's loading/dock area - employees were exposed to a struck-by or crush-by hazard, in that, a S50XL Hyster lift truck, serial # A187V05157G was being used without a seat belt.
Recent events (2)
- — I (S) $1260
- — Z (S) $2100
1910.213 C01
- Issued
- Apr 1, 2015
- Penalty
- Initial $4,200 · Current $2,520 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed saws used for cross-cutting or ripping wood were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) On or about 02/26/2015 in the carpentry shop area a Powermatic ACCU-Fence table saw, ser.# 120/20000990 was not guarded exposing employees to a struck-by and/or amputation hazard.
Recent events (2)
- — I (S) $2520
- — Z (S) $4200
1910.242 B
- Issued
- Apr 1, 2015
- Abate by
- Apr 20, 2015
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) On or about 02/26/2015 in the welding, wood shop and manufacturing area, blow guns on compressed air hoses had pressures of 75 and 110 PSI, exposing employees to struck-by hazard.
Recent events (2)
- — I (S) $1260
- — Z (S) $2100
1910.1200 E01
- Issued
- Apr 1, 2015
- Abate by
- Apr 20, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) On or about 02/26/2015 at building #210 where chemical products, such as alcohol, adhesive and mineral oil were used, a hazard communication program was not established.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 F05
- Issued
- Apr 1, 2015
- Abate by
- Apr 20, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein: a) On or about 02/26/2015 throughout building # 210, employees using plastic bottles with chemicals such as, but not limited to, alcohol and mineral oil were not properly labeled.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at MBF Industries, INC.
View MBF Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336211)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340441534.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.