SAN ANTONIO, TX —
OSHA Inspection: TINDALL CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of TINDALL CORPORATION in 2222 WEST MALONE AVE, SAN ANTONIO, TX 78225 (NAICS 327390). OSHA activity number 340442664.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TINDALL CORPORATION
- Site address
- 2222 WEST MALONE AVE
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78225
- Mailing
- 2222 WEST MALONE AVE, SAN ANTONIO, TX 78225
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327390
- Employees
- 125
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.179 B05
- Issued
- Aug 18, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $3,600 · Current $0 Reduced
General-duty citation text
29 CFR 1910.179(b)(5): The rated load of crane(s) was not plainly marked on each side of the crane: Warehouse, near 195 Bed: On or about March 18, 2015, an employee was exposed to a struck by hazard while operating a job made gantry crane, that did not display a load rating.
Recent events (2)
- — I (S) $0
- — Z (S) $3600
1910.179 J02 III
- Issued
- Aug 18, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $3,600 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the hook inspected, were not performed: Warehouse, near 195 Bed: On or about March 18, 2015, an employee was exposed to a struck by hazard while operating a 1000 pound gantry crane, which had a CM hoist attached with a deformed/twisted hook.
Recent events (2)
- — I (O) $1800
- — Z (S) $3600
1910.212 A01
- Issued
- Aug 18, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $3,600 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Machine shop: On or about March 04, 2015, an employee was exposed to a caught in hazard while operating a Wilton Horizontal/Vertical Band Saw, Model #3410, while the unused portion of the blade was not guarded against accidental contact. b) Fabrication shop: On or about March 04, 2015, an employee was exposed to a caught in hazard while operating a Wilton Floor Mounted Drill Press, Model 2500, while the Drill Press was not equipped with a chuck guard.
Recent events (2)
- — I (O) $1800
- — Z (S) $3600
1910.212 B
- Issued
- Aug 18, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $2,700 · Current $1,350 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: Fabrication shop: On or about March 04, 2015, an employee was exposed to a stuck by hazard while operating a Wilton Floor Mounted Drill Press, Model 2500, while the Drill Press was not mounted to the floor to prevent tip over or walking.
Recent events (2)
- — I (O) $1350
- — Z (S) $2700
1910.253 B04 III
- Issued
- Aug 18, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $3,600 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet: a) Steel/rebar shop: On or about March 04, 2015, employees were exposed to a fire hazard while working near Oxygen and Acetylene compressed gas cylinders which were stored together. b) Fabrication shop: On or about March 04, 2015, employees were exposed to a fire hazard while working near Oxygen and Acetylene compressed gas cylinders which were stored together.
Recent events (2)
- — I (O) $1800
- — Z (S) $3600
1910.303 B01
- Issued
- Aug 18, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $3,600 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees, in that the employer did not ensure the safety of the equipment pursuant to the considerations in sections (i) through (viii) of 29 CR 1910.303(b)(1): Maintenance shop: On or about March 04, 2015, an employee was exposed to an electrical hazard while operating a cord and plug connected equipment, while the 120 Vac cords outer jacket was pulled away from the plug exposing the cords internal wiring.
Recent events (2)
- — I (O) $1800
- — Z (S) $3600
1910.305 B01 II
- Issued
- Aug 18, 2015
- Abate by
- Aug 26, 2015
- Penalty
- Initial $3,600 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: Machine shop: On or about March 04, 2015, an employee was exposed to an electrical hazard while operating a Hill Acme Kling MetalWorker, Model 5, while the equipment's electrical disconnect switch was missing a 1/2 inch knock out on top of the disconnect.
Recent events (2)
- — I (O) $1800
- — Z (S) $3600
More inspections at Tindall Corporation
View Tindall Corporation's full OSHA safety record →
More inspections in this industry (NAICS 327390)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340442664.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.