Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SUMMIT PACKAGING SYSTEMS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of SUMMIT PACKAGING SYSTEMS, INC. in 400 GAY STREET, MANCHESTER, NH 03103 (NAICS 326199). OSHA activity number 340444207.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Summit Packaging Systems, INC. — free Get an email when a new federal OSHA severe-injury report for Summit Packaging Systems, INC. is published. One employer, no account, unsubscribe in one click.
Site address
400 GAY STREET
City
MANCHESTER
State
NH
ZIP
03103
Mailing
400 GAY STREET, MANCHESTER, NH 03103
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326199
Employees
400
Ownership type
A

5 citations on file for this inspection.

1910.132 D01 I

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 15, 2015
Abate by
May 11, 2015
Penalty
Initial $3,300 · Current $1,238 Reduced
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment:    (a) Location: facility      On or about 3/5/15, the employer did not perform an assessment to determine if personal protective equipment was necessary while working with hazardous chemicals.
Recent events (2)
  • — I (S) $1237.5
  • — Z (S) $3300

1910.333 A

Serious Gravity 10 1 instance 3 exposed
Issued
Apr 15, 2015
Abate by
Jun 2, 2015
Penalty
Initial $7,000 · Current $2,063 Reduced
29 CFR 1910.333(a): Safety-related work practices were not employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work was performed near or on equipment or circuits which were or could be energized:    (a) Location: facility  On or about 3/5/15 the employer did not develop and implement safety-related work practices for employees working on equipment with energized circuits.
Recent events (2)
  • — I (S) $2062.5
  • — Z (S) $7000

1910.147 C07 I B

Serious Gravity 5 1 instance 12 exposed
Issued
Apr 15, 2015
Abate by
Jun 2, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure:    (a) Location: facility  On or about 3/5/15 The employer did not provide lock out tag out training for all employees required to operate or use machinery on which maintenance or servicing is being performed.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.335 A01 I

Serious Gravity 10 1 instance 12 exposed
Issued
Apr 15, 2015
Abate by
May 11, 2015
Penalty
Initial $7,000 · Current $0 Reduced
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not provided with electrical protective equipment that was appropriate for the specific parts of the body that needed to be protected and for the work being performed:    (a) Location:  On or about 3/5/15, the employer did not provide protective equipment to employees required to work on equipment with potential electrical hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $7000

1910.335 A01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 15, 2015
Abate by
May 11, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.335(a)(1)(ii): Protective equipment was not maintained in a safe, reliable condition and/or was not periodically inspected or tested:    (a) Location: facility  On or about 3/5/15, rubber insulated gloves used for testing electrical circuits were not tested 6 months after initial use as required by 1910.137(c)(2)(viii)
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Summit Packaging Systems, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340444207.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.