Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DIVERSIFIED CONVEYORS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DIVERSIFIED CONVEYORS, INC. in 7800 TURKEY HOLLOW RD, ROCK ISLAND, IL 61201 (NAICS 238990). OSHA activity number 340446624.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Diversified Conveyors, INC. — free Get an email when a new federal OSHA severe-injury report for Diversified Conveyors, INC. is published. One employer, no account, unsubscribe in one click.
Site address
7800 TURKEY HOLLOW RD
City
ROCK ISLAND
State
IL
ZIP
61201
Mailing
3160 DIRECTORS ROW, MEMPHIS, TN 38131
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238990
Employees
16
Ownership type
A

8 citations on file for this inspection.

1926.451 B02

Deleted Serious Gravity 5 1 instance 15 exposed
Issued
Jun 3, 2015
Abate by
Jun 15, 2015
Penalty
Initial $0 · Current $0
29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide:     Employees installing conveyor systems were exposed to a fall hazard when working from the midrail of the scissor lift, and a firm footing on the platform floor was not maintained at all times.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.150 C01 VIII

Deleted Serious Gravity 5 1 instance 15 exposed
Issued
Jun 3, 2015
Abate by
Jun 15, 2015
Penalty
Initial $3,600 · Current $0 Reduced
29 CFR 1926.150(c)(1)(viii): Portable fire extinguishers were not inspected periodically in accordance with maintenance and use of portable fire extinguishers, N.F.P.A. No. 10A-1970:   The employer had portable fire extinguishers throughout the facility for employee use in the event of a fire.   The company did not perform periodically inspections in order to ensure that the water portable fire extinguishers were fully, charged, undamaged, and ready for immediate use.
Recent events (3)
  • — F (S) $0
  • — C (S) $3600
  • — Z (S) $3600

1926.351 B04

Deleted Serious Gravity 5 1 instance 15 exposed
Issued
Jun 3, 2015
Abate by
Jun 15, 2015
Penalty
Initial $3,600 · Current $0 Reduced
29 CFR 1926.351(b)(4): Welding cable(s) in use were in need of repair:     Employees were exposed to electrical hazards when using a lead from an ES 275i Inverter Welder, because the bare conductors were only protected by rubber splicing tape.
Recent events (3)
  • — F (S) $0
  • — C (S) $3600
  • — Z (S) $3600

1926.351 C03

Other-than-serious 1 instance 15 exposed
Issued
Jun 3, 2015
Abate by
Jun 15, 2015
Penalty
Initial $3,600 · Current $1,000 Reduced
29 CFR 1926.351(c)(3): When a structure or pipeline is employed as a ground return circuit, it shall be determined that the required electrical contact exists at all joints. The generation of an arc, sparks, or heat at any point shall cause rejection of the structures as a ground circuit.    Employees were exposed to electrical hazards when using ES 275i Inverter Welders, which was grounded to a painted steel structural of the warehouse.  The structure had arcing residue, indicating that a ground circuit had been created.
Recent events (3)
  • — F (O) $1000
  • — C (S) $3600
  • — Z (S) $3600

1926.502 D15

Serious Gravity 10 1 instance 15 exposed
Issued
Jun 3, 2015
Abate by
Jun 15, 2015
Penalty
Initial $6,300 · Current $6,300
29 CFR 1926.502(d)(15): Anchorage points used for attachment of personal fall arrest equipment were not  independent of any anchorage point being used to support or suspend platforms and capable of supporting at least 5,000 pounds (22.2 kN) per employee     Employees installing conveyor systems were exposed to fall hazards of approximately 9ft and 20ft because anchorage points used were not capable of supporting at least 5,000 pounds per employee.
Recent events (3)
  • — F (S) $6300
  • — C (S) $6300
  • — Z (S) $6300

1926.502 D16 III

Serious Gravity 10 1 instance 15 exposed
Issued
Jun 3, 2015
Abate by
Jun 15, 2015
Penalty
Initial $0 · Current $0
29 CFR 1926.502(d)(16)(iii): Personal fall arrest systems, when stopping a fall, were not rigged such that an employee could not free fall more than 6 feet (1.8 m) nor contact any lower level:    An employee installing conveyor systems was exposed to a fall hazard of approximately 9ft because the lanyard was not rigged where the employee could not free fall more than 6 feet or contact the concrete surface.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.20 B02

Serious Gravity 5 1 instance 15 exposed
Issued
Jun 3, 2015
Abate by
Jun 15, 2015
Penalty
Initial $3,600 · Current $0 Reduced
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s)       Employees installing conveyor systems were exposed to fall hazards, and the employer did not ensure a competent person inspected the job site for unsafe activity and took necessary steps to eliminate or control fall hazards.
Recent events (3)
  • — F (S) $0
  • — C (S) $3600
  • — Z (S) $3600

1926.501 B01

Serious Gravity 10 1 instance 15 exposed
Issued
Jun 3, 2015
Abate by
Jun 15, 2015
Penalty
Initial $6,300 · Current $0 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.       Employees installing conveyor systems were exposed to fall hazards of approximately 9ft and 20ft. and none of the fall protection systems specified above was used.
Recent events (3)
  • — F (S) $0
  • — C (S) $6300
  • — Z (S) $6300

View Diversified Conveyors, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340446624.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.