POMPANO BEACH, FL —
OSHA Inspection: CLINT KITCHEN & BATH INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CLINT KITCHEN & BATH INC. in 1000 SOUTH DIXIE HIGHWAY BAY A028-027, POMPANO BEACH, FL 33060 (NAICS 337110). OSHA activity number 340451731.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CLINT KITCHEN & BATH INC.
- Site address
- 1000 SOUTH DIXIE HIGHWAY BAY A028-027
- City
- POMPANO BEACH
- State
- FL
- ZIP
- 33060
- Mailing
- 811 SW 63RD TERRACE, NORTH LAUDERDALE, FL 33068
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.213 A10
- Issued
- May 19, 2015
- Abate by
- Jun 1, 2015
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(a)(10): It is recommended that each power-driven woodworking machine be provided with a disconnect switch that can be locked in the off position: (a): On or about April 16, 2015, employees were exposed to electrical hazards when using a Delta 10 Inch Left Tilt Contractor's Table Saw that did not have a magnetic cut-off switch preventing the saw from automatically starting in the event of a power failure.
Recent events (3)
- — J (S) $0
- — C (S) $2000
- — Z (S) $2000
1910.213 C01
- Issued
- May 19, 2015
- Abate by
- Jun 1, 2015
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a): On or about April 16, 2015, at the above addressed worksite, employees were exposed to amputation hazards while using an unguarded Delta 10 Inch Left Tilt Contractor's Table Saw.
Recent events (3)
- — J (S) $0
- — C (S) $2000
- — Z (S) $2000
1910.303 B02
- Issued
- May 19, 2015
- Abate by
- Jun 1, 2015
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a): On or about April 16, 2015, at the above addressed worksite, employees were exposed to electrical hazards while using a Delta 10 Inch Left Tilt Contractor's Table Saw that had a flush mount type electrical enclosure for the on/off switch.
Recent events (3)
- — J (S) $0
- — C (S) $1600
- — Z (S) $1600
1910.305 B01 II
- Issued
- May 19, 2015
- Abate by
- Jun 1, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a): On or about April 16, 2015, at the above addressed worksite, employees were exposed to electrical hazards while using a Delta 10 Inch Left Tilt Contractor's Table Saw that had a flush mount type electrical enclosure for the on/off switch that was missing knockouts.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.305 G02 II
- Issued
- May 19, 2015
- Abate by
- Jun 1, 2015
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap: (a): On or about April 16, 2015, at the above addressed worksite, employees were exposed to electrical hazards while using a Makita portable hand held router with a spliced cord.
Recent events (3)
- — J (S) $0
- — C (S) $1600
- — Z (S) $1600
1910.305 G02 III
- Issued
- May 19, 2015
- Abate by
- Jun 1, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a): On or about April 16, 2015, at the above addressed worksite, employees were exposed to electrical hazards while using a Craftsman Air Compressor that was missing a strain relief.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 337110)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340451731.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.