Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CLINE'S WELDING AND FABRICATION, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of CLINE'S WELDING AND FABRICATION, INC. in 41 VETERANS MEMORIAL HIGHWAY, MABLETON, GA 30126 (NAICS 332999). OSHA activity number 340453836.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Cline'S Welding and Fabrication, INC. — free Get an email when a new federal OSHA severe-injury report for Cline'S Welding and Fabrication, INC. is published. One employer, no account, unsubscribe in one click.
Site address
41 VETERANS MEMORIAL HIGHWAY
City
MABLETON
State
GA
ZIP
30126
Mailing
41 VETERANS MEMORIAL HIGHWAY, MABLETON, GA 30126
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
12
Ownership type
A

5 citations on file for this inspection.

1910.1200 E01

Serious Gravity 1 1 instance 12 exposed
Issued
Apr 8, 2015
Penalty
Initial $1,200 · Current $720 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a)  Throughout the facility - The employer did not establish a written hazard communication program for the employees exposed to hazardous substances such as, but not limited to: propane, lacquer thinner (containing: acetone and toluene), Magic stainless steel cleaner (containing mineral oil), and argon gas, exposing the employees to respiratory, eye, and skin irritations.
Recent events (2)
  • — I (S) $720
  • — Z (S) $1200

1910.1200 G01

Serious Gravity 1 1 instance 12 exposed
Issued
Apr 8, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:  a)  Throughout the facility - The employer did not provide the safety data sheets (SDS) for employees who were required to work with chemicals, such as but not limited to:  propane, lacquer thinner (containing: acetone and toluene), Magic stainless steel cleaner (containing mineral oil), and argon gas, exposing employees to respiratory, eye, and skin irritations.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 1 1 instance 12 exposed
Issued
Apr 8, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a)  Throughout the facility -  The employer did not provide training, to include the new hazard communication standard Global Harmonized System (GHS) that became effective December 1, 2013, to employees exposed to hazardous substances such as, but not limited to, propane, lacquer thinner (containing: acetone and toluene), Magic stainless steel cleaner (containing mineral oil), and argon gas, exposing employees to respiratory, eye, and skin irritations.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.38 B

Other-than-serious 1 instance 12 exposed
Issued
Apr 8, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.38(b): An emergency action plan was not established and verbally explained to employees:  a)  Throughout the facility - The employer did not ensure that a written emergency action plan was in place in the event of a fire, tornado, or other disasters, exposing employees to smoke inhalation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1026 D01

Other-than-serious 1 instance 5 exposed
Issued
Apr 8, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI):  a) Welding Department: The employer did not initially monitor the workplace to determine the 8-hour time weighted average exposure for employees exposed to chromium (VI) while welding on stainless steel.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Cline'S Welding and Fabrication, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340453836.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.