NEPTUNE, NJ —
OSHA Inspection: ELECTRO IMPULSE LABORATORY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ELECTRO IMPULSE LABORATORY, INC. in 1805 ROUTE 33, NEPTUNE, NJ 07754 (NAICS 333415). OSHA activity number 340453919.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ELECTRO IMPULSE LABORATORY, INC.
- Site address
- 1805 ROUTE 33
- City
- NEPTUNE
- State
- NJ
- ZIP
- 07754
- Mailing
- 1805 ROUTE 33, NEPTUNE, NJ 07754
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333415
- Employees
- 36
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C01
- Issued
- Apr 28, 2015
- Abate by
- May 22, 2015
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a) The employer did not develop and implement a written lockout/tagout program for the protection of employees required to service and maintain machinery. On or about 02/19/2015. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.151 C
- Issued
- Apr 28, 2015
- Abate by
- May 8, 2015
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) Parts Washing Area - Where employees were exposed to the hazard of having corrosive liquids splashed in their eyes, no eyewash was available in the work area. The chemicals ranged from pH2.0 to pH2.3. On or about 02/19/2015. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.178 L04 III
- Issued
- Apr 28, 2015
- Abate by
- May 22, 2015
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) 1805 Route 33, Neptune, NJ 07754 - Fork truck operators did not have their performance evaluated within the last three years. On or about 02/11/2015. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.212 A03 II
- Issued
- Apr 28, 2015
- Abate by
- May 22, 2015
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury, was not guarded: a) Press Brake - The press brake did not have a guard to prevent operators from placing body parts in the machine's point of operation. On or about 02/19/2015. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
More inspections at Electro Impulse Laboratory, INC.
View Electro Impulse Laboratory, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333415)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340453919.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.