Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LEWCOTT CORPORATION

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of LEWCOTT CORPORATION in 86 PROVIDENCE RD, MILLBURY, MA 01527 (NAICS 325211). OSHA activity number 340454305.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Lewcott Corporation — free Get an email when a new federal OSHA severe-injury report for Lewcott Corporation is published. One employer, no account, unsubscribe in one click.
Establishment
LEWCOTT CORPORATION
Site address
86 PROVIDENCE RD
City
MILLBURY
State
MA
ZIP
01527
Mailing
86 PROVIDENCE RD, MILLBURY, MA 01527
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
325211
Employees
74
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 18 exposed
Issued
Apr 24, 2015
Abate by
May 13, 2015
Penalty
Initial $3,600 · Current $1,500 Reduced
OSH ACT of 1970 Section (5)(a)(1): OSH ACT of 1970 SECTION (5)(a)(1): The employer did not furnish a place of employment which was free from recognized hazards that was causing or likely to cause death or serious physical harm to employees. Employees were exposed to hazards of being struck-by the load, should the load slip off the load hook on the hoist at the heat sealer.  The hook had a broken safety latch and a fabric rigging strap.  Among other methods, one feasible method of abatement is to replace the damaged safety clip on the load hook, conduct periodic inspections of all hoists for wear, deterioration and malfunction and provide support structure ratings as per ASME B30.16-1993.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $3600

1910.212 A03 II

Serious Gravity 10 1 instance 18 exposed
Issued
Apr 24, 2015
Abate by
May 13, 2015
Penalty
Initial $6,300 · Current $5,000 Reduced
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle:    Heat sealing machine, Barrday Composite Solutions, 86 Providence Road, Millbury, Massachusetts;  The point of operation guarding, two hand control, on the heat sealing machine used to splice fabric together was not sufficient to prevent the operator from having any part of their body in the danger zone during the operating cycle.
Recent events (2)
  • — I (S) $5000
  • — Z (S) $6300

1910.334 A02 I

Serious Gravity 5 1 instance 18 exposed
Issued
Apr 24, 2015
Abate by
May 6, 2015
Penalty
Initial $3,600 · Current $1,500 Reduced
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket):    Heat sealing machine, Barrday Composite Solutions, 86 Providence Road, Millbury, Massachusetts;  The flexible cord for the heat sealing machine had damage to the external insulation that had been covered with electrical tape.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $3600

1904.39 A02

Deleted Other-than-serious 1 instance 1 exposed
Issued
Apr 24, 2015
Abate by
Apr 30, 2015
Penalty
Initial $4,500 · Current $0 Reduced
29 CFR 1904.39(a)(2): 29 CFR 1904.39(a)(2): The employer did not report the in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours.   Barrday Composite Solutions, 86 Providence Road, Millbury, Massachusetts;  The employer did not report an amputation that occurred on February 11, 2015 within 24 hours to the Occupational Safety and Health Administration.
Recent events (2)
  • — I (O) $0
  • — Z (O) $4500

View Lewcott Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340454305.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.