IRON RIVER, WI —
OSHA Inspection: ELDCO, LLC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ELDCO, LLC. in 8725 SOUTH GRAVEL PIT ROAD, IRON RIVER, WI 54847 (NAICS 332999). OSHA activity number 340461318.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ELDCO, LLC.
- Site address
- 8725 SOUTH GRAVEL PIT ROAD
- City
- IRON RIVER
- State
- WI
- ZIP
- 54847
- Mailing
- PO BOX 158, IRON RIVER, WI 54847
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 6
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C01
- Issued
- Sep 4, 2015
- Abate by
- Oct 5, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) ELDCO, LLC: The employer did not establish and implement an energy control program for workers to maintain and service equipment, such as but not limited to, the CNC plasma cutter and the metal shear.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.178 P01
- Issued
- Sep 4, 2015
- Abate by
- Sep 21, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): (a) Shipping area; The Clark forklift did not have working brakes and was not taken out of service until the issues were repaired.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.215 A04
- Issued
- Sep 4, 2015
- Abate by
- Sep 21, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) North end of the metal fabrication shop; The work rest on the bench grinder bench grinder was set approximately 1 3/8 inch from the abrasive wheel.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.215 B09
- Issued
- Sep 4, 2015
- Abate by
- Sep 21, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) North end of the metal fabrication shop; The tongue guard on the bench grinder bench grinder was set approximately 3/4 inch from the abrasive wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Eldco, LLC.
View Eldco, LLC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340461318.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.