Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ALLEN ROOFING & SIDING COMPANY, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ALLEN ROOFING & SIDING COMPANY, INC. in 1-10 SADDLE WAY BLDG#1, SARATOGA SPRINGS, NY 12866 (NAICS 238160). OSHA activity number 340462027.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Allen Roofing & Siding Company, INC. — free Get an email when a new federal OSHA severe-injury report for Allen Roofing & Siding Company, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1-10 SADDLE WAY BLDG#1
City
SARATOGA SPRINGS
State
NY
ZIP
12866
Mailing
27 YARDBORO AVE., ALBANY, NY 12205
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
12
Ownership type
A

4 citations on file for this inspection.

1926.1060 A

Serious Gravity 10 1 instance 4 exposed
Issued
Apr 1, 2015
Abate by
May 4, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards.   a) 1-10 Saddle Way, Saratoga Springs NY. - On or about January 29th, 2015 - Employees were exposed to fall hazards of approximately 23 feet in height while using an extension ladder to access a roof.  The ladder side rails did not extend at least 3 feet above the upper landing surface to which the ladder was used to gain access. The employer did not provide a training program for each employee using ladders and stairways.
Recent events (1)
  • — Z (S) $2800

1926.501 B11

Repeat Gravity 10 1 instance 4 exposed
Issued
Apr 1, 2015
Penalty
Initial $5,600 · Current $5,600
29 CFR 1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:  a) 1-10 Saddle Way, Saratoga Springs NY. - On or about January 29th, 2015 - Employees were exposed to fall hazards of approximately 23 feet in height while on a steep roof without the use of a guardrail system, safety net system, or personal fall arrest system.    Allen Roofing & Siding Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 444033, citation number 1, item number 2a and was affirmed as a final order on 09/18/2012, with respect to a workplace located at 333 10th Street in Troy NY.
Recent events (1)
  • — Z (R) $5600

1926.503 A01

Repeat Gravity 10 1 instance 4 exposed
Issued
Apr 1, 2015
Abate by
May 4, 2015
Penalty
Initial $5,600 · Current $5,600
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a) 1-10 Saddle Way, Saratoga Springs NY. - On or about January 29th, 2015 - Employees were exposed to fall hazards of approximately 23 feet in height while on a steep roof without the use of a fall arrest system. The employer did not provide a training program for each employee exposed to the fall hazard.    Allen Roofing & Siding Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.503(a)(1), which was contained in OSHA inspection number 444033, citation number 1, item number 2b and was affirmed as a final order on 09/18/2012, with respect to a workplace located at 333 10th Street in Troy NY.
Recent events (1)
  • — Z (R) $5600

1926.1053 B01

Repeat Gravity 10 2 instances 4 exposed
Issued
Apr 1, 2015
Penalty
Initial $5,600 · Current $5,600
29 CFR 1926.1053(b)(1): When portable ladders were used for access to an upper landing surface, the ladder side rails did not extend at least 3 feet above the upper landing surface to which the ladder was used to gain access.  a) 1-10 Saddle Way, Saratoga Springs NY. - On or about January 29th, 2015 - Employees were exposed to fall hazards of approximately 23 feet in height while using an extension ladder to access a roof.  The ladder side rails did not extend at least 3 feet above the upper landing surface to which the ladder was used to gain access.   Allen Roofing & Siding Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.1053(b)(1), which was contained in OSHA inspection number 444033, citation number 2, item number 1A and was affirmed as a final order on 09/18/2012, with respect to a workplace located at 333 10th Street in Troy NY.
Recent events (1)
  • — Z (R) $5600

View Allen Roofing & Siding Company, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340462027.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.