PROSPER, TX —
OSHA Inspection: ARNULFO GONZALEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ARNULFO GONZALEZ in 621 DEBBIE COURT, PROSPER, TX 75078 (NAICS 238140). OSHA activity number 340468354.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ARNULFO GONZALEZ
- Site address
- 621 DEBBIE COURT
- City
- PROSPER
- State
- TX
- ZIP
- 75078
- Mailing
- 2830 PATRICIA LANE APT 104, GARLAND, TX 75041
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.300 B01
- Issued
- Mar 27, 2015
- Abate by
- Apr 8, 2015
- Penalty
- Initial $2,800 · Current $580 Reduced
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: This violation occurred on or about March 17, 2015 at a jobsite located at 621 Debbie Court in Prosper, Texas; where at least one (1) employee was using a chop saw to cut brick and was not required to use the lower guard that was provided on the saw. The lower guard was disabled by a wood wedge.
Recent events (2)
- — I (S) $580
- — Z (S) $2800
1926.307 F03
- Issued
- Mar 27, 2015
- Abate by
- Apr 8, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.307(f)(3): The employer failed to guard gears, sprockets and/or chains that were less than 7 feet (2.128 m) from the floor or platform: This violation occurred on or about March 17, 2015 at a jobsite located at 621 Debbie Court in Prosper, Texas; where employees were required to use a mortar mixer that did not have an enclosure for the sprocket and gear.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 B02
- Issued
- Mar 27, 2015
- Abate by
- Apr 8, 2015
- Penalty
- Initial $2,000 · Current $400 Reduced
General-duty citation text
29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide: This violation occurred on or about March 17, 2015 at a jobsite located at 621 Debbie Court in Prosper, Texas; where employees were required to work from a tubular welded frame scaffold with platforms that were less than 18 inches wide.
Recent events (2)
- — I (S) $400
- — Z (S) $2000
1926.451 E01
- Issued
- Mar 27, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used: This violation occurred on or about March 17, 2015 at a jobsite located at 621 Debbie Court in Prosper, Texas; where employees were not provided with a portable or hook on ladder and were using the end frames and cross braces to gain access to the upper levels of the two tier tubular welded frame scaffold.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.452 C02
- Issued
- Mar 27, 2015
- Abate by
- Apr 8, 2015
- Penalty
- Initial $2,800 · Current $580 Reduced
General-duty citation text
29 CFR 1926.452(c)(2): All brace connections were not secured: This violation occurred on or about March 17, 2015 at a jobsite located at 621 Debbie Court in Prosper, Texas; where employees were required to use a tubular welded frame scaffold that did not have all the brace connections secured.
Recent events (2)
- — I (S) $580
- — Z (S) $2800
More inspections at Arnulfo Gonzalez
View Arnulfo Gonzalez's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340468354.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.