BURLINGTON, NJ —
OSHA Inspection: MACE CONSTRUCTION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MACE CONSTRUCTION, INC. in 1137 BORDENTOWN ROAD, BURLINGTON, NJ 08016 (NAICS 238140). OSHA activity number 340469659.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MACE CONSTRUCTION, INC.
- Site address
- 1137 BORDENTOWN ROAD
- City
- BURLINGTON
- State
- NJ
- ZIP
- 08016
- Mailing
- 12301 MCNULTY ROAD UNIT E, PHILADELPHIA, PA 19154
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.100 A
- Issued
- Apr 28, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: a- North Side Of Building - 1137 Bordentown Road, Burlington NJ: On or about 03/16/15, company employees, performing stucco application and other related activities from different tiers of a metal prefabricated tubular welded framed scaffold, were exposed to struck by injuries when they were not wearing head protection.
Recent events (1)
- — Z (S) $2800
1926.451 B01
- Issued
- Apr 28, 2015
- Abate by
- May 6, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii) a- North Side Of Building - 1137 Bordentown Road, Burlington NJ: On or about 03/16/15, company employees performing stucco application and other related activities from a prefabricated, tubular, welded framed scaffold were exposed to falls in excess of 16 feet to the ground surface below when the scaffold they were working from was not fully planked. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2800
1926.451 F06
- Issued
- Apr 28, 2015
- Abate by
- May 6, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(f)(6): Scaffolds were erected, used, dismantled, altered, or moved such that they, or any conductive material handled on them, could have come closer than the minimum distances established for specific voltages as set forth in the table in subparagraph (f)(6). a- North Side Of Building - 1137 Bordentown Road, Burlington NJ: On or about 03/16/15, company employees, performing stucco application and other related activities from a metal prefabricated tubular welded framed scaffold, were exposed to electrocution hazards when working less than 3 feet from a live power line. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2800
1926.451 F07
- Issued
- Apr 28, 2015
- Abate by
- May 22, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration:; Such activities were not performed only by experienced and trained employees selected for such work by the competent person. a- North Side Of Building - 1137 Bordentown Road, Burlington NJ: On or about 03/16/15, company employees performing stucco application and other related activities from a prefabricated, tubular, welded framed scaffold were exposed to falls in excess of 16 feet to the ground surface below when the scaffold they were working from was not fully planked, was missing mid/top rails and end stops, was set up so employees were working next to a live power line, etc. The scaffolding was not erected by a competent person. b- West Side Of Building - 1137 Bordentown Road, Burlington NJ: On or about 03/16/15 a company employee performing stucco application and other related activities from a single metal pick set between two frames of a prefabricated, tubular welded framed scaffold was exposed to falls in excess of 13 feet to the ground surface below, when the pick was not supplied with mid/top rails. The scaffolding was not erected by a competent person. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2800
1926.451 G01
- Issued
- Apr 28, 2015
- Abate by
- May 6, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section: a- North Side Of Building - 1137 Bordentown Road, Burlington NJ: On or about 03/16/15, company employees performing stucco application and other related activities from a prefabricated, tubular, welded framed scaffold were exposed to falls in excess of 16 feet to the ground surface below when the scaffold they were working from was not fully planked, was missing mid/top rails and end stops, etc. b- West Side Of Building - 1137 Bordentown Road, Burlington NJ: On or about 03/16/15 a company employee performing stucco application and other related activities from a single metal pick set between two frames of a prefabricated, tubular welded framed scaffold was exposed to falls in excess of 13 feet to the ground surface below, when the pick was not supplied with mid/top rails. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2800
1926.454 A
- Issued
- Apr 28, 2015
- Abate by
- May 22, 2015
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a- North Side Of Building - 1137 Bordentown Road, Burlington NJ: On or about 03/16/15, company employees performing stucco application and other related activities from a prefabricated, tubular, welded framed scaffold were exposed to falls in excess of 16 feet to the ground surface below when the scaffold they were working from was not fully planked, was missing mid/top rails and end stops, was set up so employees were working next to a live power line, etc. These employees had not received training from a qualified person in order to recognize hazards associated with scaffolding. b- West Side Of Building - 1137 Bordentown Road, Burlington NJ: On or about 03/16/15 a company employee performing stucco application and other related activities from a single metal pick set between two frames of a prefabricated, tubular welded framed scaffold was exposed to falls in excess of 13 feet to the ground surface below, when the pick was not supplied with mid/top rails. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2800
More inspections at Mace Construction, INC.
View Mace Construction, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340469659.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.