OSHA Inspection: PATROCINIO GARCIA

Issued

2015-03-27 00:00:00

Abate by

2015-04-08 00:00:00

Penalty

Initial $2800.00 · Current $2800.00

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  Patrocinio Garcia - on or about March 18, 2015, at Lot 34 of the Enclave at Huntcrest subdivision, located at 1266 Calistoga Way, the employer did not provided fall protection when an employee stood at an unguarded edge 12 feet above the next level while operating a nail gun and lifting oriented strand board.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

2015-03-27 00:00:00

Abate by

2015-04-08 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  Patrocinio Garcia - on or about March 18, 2015, at Lot 34 of the Enclave at Huntcrest subdivision, located at 1266 Calistoga Way, the employer did not provided adequate training on fall  hazards and need for fall protection when an employee stood at an unguarded edge 12 feet above the next level while operating a nail gun and lifting oriented strand board.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.